Fer Deco is a decorative painting water-based rust effect, suitable for interior decoration.
- Product ready to use.
- Ease of application
- Highly breathable.
- Optimum bondthe support.
- Odorless, water-based (solvent).
Painting effect Fer Deco oxide is recommended for interior decoration where you want to create a different, sophisticated and delicate environment.
Technical characteristics of the paint rust effect
- Performance: 6-8 m² / L (approximately)
- Layers: Two layers of Fer Deco for optimum finish
- Tools for application: Trowel.
- Cleaning: Clean tools with water before the product dry completely.
Apply a first coat by stainless steel trowel vertically dispersing the product conveniently. After 3-4 hours, apply a 2nd product hand extending vertically and / or horizontally to effect the desired oxide.
Application on new surfaces:They must be in good condition, firm, dry, and is dusty. Suitable carriers for the use of this product are: cement mortar, gypsum, isCayola or similar, always applying a coat of plastic paint quality.
Application on old surfaces: We proceed to its full sanitizing and apply the same scheme, being able in some cases eliminate the fixer preparation if the absorption of the surface is low. It is advisable to apply a layer of acrylic binder on the support. Proceed as if it were a new surface.
The colors are approximate and may vary depending on the computer screen you are using.