Preparation with good penetration and adhesion, easy sanding. Suitable for non-alkaline porous surfaces (gypsum, etc.), as well as wood. Seal and standardizes porous surfaces, preventing sink marks on the finish.
Main properties of the sealing primer Imprimol Titan H3>
Excellent quality / price ratio. P>
-Good Adhesion and hiding power.
Excellent sealing power.
Easy application and sanding.
-Good Brochabilidad and leveling. P>
Bricks, plasters, surfaces with salt, smoke-stained, fat: their qualities of opacity and adhesion, the use of the sealing primer Imprimol Titan in the preparation of all types of porous surfaces that present difficulties in their painted, such as advised , new wood, etc. Should not be used as a topcoat, its main application is in preparation surfaces to be painted with plastic paints and alkyd enamels. P>
-Performance: 8-11 m² / Lt (depending on materialwhere applicable).
-layers: Apply one or two coats depending on the porosity of the substrate.
-Useful Application: Apply by brush or roller.
How to use
General recommendations:Stir in the package. The surfaces must be clean, dry, degreased and consistent.
Wood unprepared surfaces Span>: Sand the wood in the direction of the grain, clean thoroughly, remove resins or resins secretions and kill sharp edges. Apply 1 coat of sealer Imprimol. Sand and remove dust. Apply a second coat of sealer to achieve a uniform surface, sanding lightly. End the topcoat.
Non-alkaline porous surfaces (gypsum ...):Sealer applied directly Imprimol, if the surface is powdery, before applying a layer of fixative Fund. If the finish is to be colored, tinted with Universal Tint, being sufficient in most cases, a single layer of the final product. Among the 12 to 24 hours to repair defects with synthetic fillers. L Reviewfter the same sealer. Let dry thoroughly (24-48 hours) before applying the finish paint.