Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
White fat spray 400 ML Soudal
White fat High quality lubricant based on white lithium grease with Teflon for heavy applications. Ideal for moving parts or synthetics. Double effect: it pulverizes as if it were oil (great properties of penetration) and solidifies as grease (great adhesion capacity and good resistance to pressure). Resistant to water and protects against corrosion. Suitable for vertical applications, does not drip.
Related Products ( 3 other products in the same category )
Product description
White grease with PTFE is a high quality lubricant based on PTFE for the treatment of metal and plastic parts.
Technical data
- Base: Mineral oil with white lithium soap and PTFE
- Consistency: Liquid
- Density: Ca 0.72 g / ml
- Viscosity: 160 cSt at 40 ° C
- Welding test of 4 balls at extreme pressure (ASTM D2596):> 400 kg
- Washable in water at 80 ° C: 2.50%
- Drip point:> 180 ° C
- Solubility in water: Insoluble
- Volatile organic compounds (VOC): 80%
- Temperature resistance: -20 ° C → 120 ° C
- Application temperature: 5 ° C → 30 ° C
Properties
- Lubrica
- Reduces friction and wear
- Resistant to rust and corrosion
- Waterproof
- Does not contain silicones
- For indoor and outdoor use
Applications
- Perfect for moving and rotating metal and plastic parts.
- With double effect: it is pulverized as oil and has deforming properties, but solidifies as grease and offers good adhesion and good resistance to pressure.
- Resistant to water and protector against corrosion.
- Suitable for vertical applications, does not flow down or drip.
- For use on machines, roller bearings, shafts, pinions, conveyor belts, profiles of rubber linings ...
Application Method
Surfaces must be cleaned, degreased and dried. Shake the can well before use. Spray it at a distance of approximately 20 cm from the object. To obtain the best result, apply the spray while moving parts are moving, if possible.
* If you want more information about this product, you can download the technical sheet in the "ATTACHED" tab.
Data sheet
- Kind of product:
- Lubricant
- Place of application
- Interior and Exterior
- Maximum temperature of use
- 30ºC
- Danger for transport:
- Prohibited Air Transportation
Download
No customer questions for the moment.