Quilosa Contact adhesive bunitex p-55 24L Quilosa

Contact adhesive bunitex p-55 24L Quilosa

196,15VAT included

The BUNITEX P-55 contact adhesive is an extraordinarily broad product. It is indicated for the gluing of wood, cork, rubber, synthetic plastic laminates, leather, leather, vegetable or synthetic fibers, some plastics (except polyethylene and other polyolefins) and metals, among themselves or on other types of substrates.

Quantity DisponibilidadOut-of-stock

Related Products ( 16 other products in the same category )

Description h3>

Contact adhesive based on a polychloroprene rubber solution. p>

Technical data h3>

  • Appearance: Medium viscosity solution and reddish yellow color li>
  • Viscosity: Brookfield RVT Needle 4 at 20 rpm and 23ºC 3000 + 500 mPa.s li>
  • Heat resistance: Approx. 70ºC
  • Resistance to peeling: 4.5 - 5 N / mm

Properties

BUNITEX P-55, is a very versatile contact adhesive with which durable and resistant glueings are obtained. Its open time makes it especially suitable for gluing large surfaces in coatings work. p>

Applications

BUNITEX P-55 is a product of extraordinary wide application. It is indicated for the gluing of wood, cork, rubber, synthetic plastic laminates, leather, leather, vegetable or synthetic fibers, some plastics (except polyethylene and other polyolefins) and metals, among themselves or on other types of substrates.

Given the diversity of materials this list is not exhaustive.

In case of doubt, it is advisable to carry out a preliminary test and / or consult with our Technical Department. p>

Indications of use

Preparation of materials strong>:

The surfaces to pegThey should be clean, dry and free of dust and grease.

Application: strong>

The application of the BUNITEX P-55, has to be done on the two sides to be joined with a brush or with a serrated spatula, leaving a uniform layer. On porous supports it is advisable to apply two layers: the first thin leaving it to dry before giving the final.

Glued:

Once the adhesive has been applied, it is necessary to allow the solvents to evaporate for 10 to 20 minutes depending on the environmental conditions.

After drying, up to 180 minutes are available for bonding, for which it is necessary to make a strong and uniform pressure ensuring the absence of air pockets.

* If you want more information about this product, you can download its technical sheet in the tab "ATTACHMENTS"

Quilosa https://pinturas-dami.com/img/m/14.jpg

20530

Data sheet

Kind of product:
Adhesive
Theoretical yield per hand (m2 / kg):
4-6.5
Diluent / Cleaning:
Universal Solvent
Type Application:
With a brush or spatula
Place of application
Interior and Exterior
Danger for transport:
Dangerous terrestrial / maritime, airborne
Evaporation solvents
10-20 min
Open work time
180 minutes
Toluene
It does not have
Adhesive application mode
2 faces

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password