Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
Flexible Fiber Putty Titanlux
Elastic filler reinforced with fiberglass in aqueous phase. It noted for its high elasticity. This quality makes it ideal for filling, sealing and assembly of fissures and cracks in surfaces that may suffer small movements: stairs, railings, wooden boards windows and doors, etc. Suitable for: plaster, concrete, brick, wood and paint.
You might also like
Related Products ( 16 other products in the same category )
Description
Pasta for stuffing, stamping and assembly of fissures and cracks with movement. Extremely flexible, reinforced with fiberglass, will not crack or fissure. High adhesion, permanently elastic. Paintable with any painting except epoxy or polyurethane solvent.
Recommended uses
Inner and outer. For surfaces of plaster, cement, concrete, wood, plastic paints.
Technical characteristics
-Color: Grey
-Useful Application: trowel or spatula.
How to use
Mixing and kneading the tube before use. Apply directly or with a spatula. For larger thicknesses applied in successive layers.
fissures:trowel or spatula. Flexible putty introduce Titanlux jumper on the fissure and a thickness of 0.3 to 3mm.
cracks:widen them, remove dust and prime. Flexible Titanlux caulk trowel or spatula perpendicular consecutive layers to prevent air pockets. Apply too much so that excess can be smoothed with a spatula or trowel on either side of the crack, leaving a band of about 3 cm. wide and projection of 5 cm. on either side of the crack. Applying a layer thickness of 0.3 - 3 mm in order to achieve adequate reinforcement and bridging.
Very wide and deep cracks should be pretreated with Putty Filler Titanlux. Once dry sand and proceed to finish.
Data sheet
- Kind of product:
- Putty
- Dry to Touch at 23ºC and 60% RH
- 2 - 24 h depending on thickness
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800055856
Download
No customer questions for the moment.