Smooth, breathable, high-performance coating that offers excellent coverage, strength and light fastness. Easy to apply For the protection and decoration of all types of surfaces, both exterior and interior.
Special smooth coating Rainbow 15 L
75,95€VAT included
Smooth, breathable, high-performance coating that offers excellent coverage, strength and light fastness. Easy to apply For the protection and decoration of all types of surfaces, both exterior and interior.
Related Products ( 12 other products in the same category )
Description h3>
Smooth, breathable, high-performance coating that offers excellent coverage, strength and light fastness. Easy to apply
p>
Recommended uses
Smooth coating for the protection of all types of facades, which you want to safeguard from the passage of time. For the decoration and protection of all types of surfaces, both outdoors and indoors, new work or previously painted walls.
Technical characteristics
- Matte finish
- Color: Colors according to letter
- Viscosity: 180 - 200 p
- Density: 1.60 - 1.70 g / cc
- Drying: To the touch: 30 minutes li>
- Repainting: 3 - 4 hours
- Theoretical yield: 8 - 9 m2 / liter (for 50 microns of dry paint)
- Solvent: Water, 10 - 20% first hands 5 - 10% finishing hands
- VOC Content: Maximum 30 g / l
Surface treatment
On all types of support:
In case of contamination by mold, fungus, algae and other parasitic elements, proceed as follows:
- Wash with a 10% solution of water and bleach.
- Rinse with water.
- Allow to dry completely before beginning to paint.
- Apply a primer. li>
- Use products that prevent mold growth. li>
In case of presence of saline efflorescence (saltpeter):
- Brush and wash with a solution of 10% HCl or zinc sulfate. li>
- Rinse with water.
- Allow to dry completely before beginning to paint.
These operations must be carried out observing the corresponding safety measures.
Application mode h3>
Brush, roller or gun. Pneumatic equipment Remove the contents of the container until it is perfectly homogenized.
Apply on surfaces that are consistent, dry and clean of dust, efflorescence, oxides, fats, waxes and properly primed. In repainting, if the existing paint is glossy, satiny or elastic, tensions can occur that give rise to cracks or fissures, so you have to sand to remove the brightness.
Do not apply on substrates whose temperature is below 5ºC or excessively hot (maximum 35ºC). Maximum relative humidity 85%.
Do not apply with rain forecast, since when the paint is wetted without being completely dry, it can produce a dissolution of its components, being able to cause the appearance of spots / shines (snail effect).
* If you want more information about this product, you can download its technical sheet in the tab "ATTACHMENTS" h5>
19833
0 Items
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 8
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 1 hour
- Time for repainting at 23ºC and 60% RH
- 3 hours
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Concrete or Cement
- Directly
- Paint Stone Elements
- Directly
- Paint Already Painted Surfaces
- Directly without sanding
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8436027623403
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form