Lasur floors Sun Decking Slip Xylazel
Lasur is specially formulated to apply on outdoor wood flooring, such as those placed around swimming pools or on terraces, in which, being hard tropical woods, traditional solvent coatings present drying problems, taking days, or even, according to the type of wood, not getting to dry. Contains additives that provide a slightly rough non-slip surface.
Related Products ( 14 other products in the same category )
Description h3>
Lasur is specially formulated to apply on outdoor wood flooring, such as those placed around swimming pools or on terraces, in which, being hard tropical woods, traditional solvent coatings present drying problems, taking days, or even, according to the type of wood, not getting to dry. Contains additives that provide a slightly rough non-slip surface.
Technical data h3>
- Density at 20 ° C: 1.02 ± 0.02 g / mL
- Drying to the touch: about 1 hour, although it depends on the type of wood.
- Drying to repaint: About 3 hours, depending on the type of wood.
Characteristics of Lasur Xylazel Sol Decking h3>
- Satin finish slightly rough.
- Rapid drying, even on tropical woods. li>
- Good adhesion
- Does not lift repelo.
- Easy application and maintenance, it is not necessary to sand in subsequent applications.
- Good leveling and finishing li>
- Hard and resistant to rubbing.
- Resistant to adverse weather conditions. li>
- Low odor in the application. Once dry it does not smell. li>
- Water base.
- It contains active principles that superficially protect the applied product against the appearance of fungi of bluish and molds (PT7). li>
- Anti-slip Clase 3 according to UNEENV 12633-2003. li>
- Suitable for interior areas where there are stairs or inclined surfaces with a slope greater than 6%.
- Suitable for outdoor areas of swimming pools and showers.
Fields of application h3>
For the protection and beautification of floors, furniture and other wooden structures to the exterior and interior, especially those made with tropical woods such as iroko, teak, ipé, cumarú, acacia, pine treated in autoclave etc.
p>
How to use
Preparation of the surface strong>
Apply on clean and dry surfaces. Remove oils, paints and varnishes that are flaking and not adhering, pickling, scratching or sanding. Protect the non-resistant woods with Xylazel Fund against rot, bluish fungi and xylophagous insects.
performance
About 12 m² / L per hand. p>
How to use
The product is presented ready for use. Shake and homogenize before and during its application. It can be applied by brush, roller or gun. Apply the recommended dose, in two or more hands. Do not apply at temperatures above 30ºC nor with rain forecast in 48 hours. p>
Maintenance
In maintenance, it is not necessary to remove previous layers of Xylazel Sun Decking Slip. Surfaces must be cleaned well before renovation. If it is necessary to apply water under pressure.
Tool cleaning strong>
Use soap and water. p>
* If you want more information about this product, you can download its technical sheet in the tab "ATTACHMENTS"
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 12
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 1 hour
- Time for repainting at 23ºC and 60% RH
- 3 hours
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414956713730
No customer questions for the moment.