Protector Morakron Weathering to the water
Special product to enhance and protect tiles and mud floors outdoors, stone, slate, sandstone, coarse and porous surfaces in general. It is a product ready to use and has a satin finish. Quick drying. span>
You might also like
Related Products ( 4 other products in the same category )
Description h3>
Special product to enhance and protect tiles and mud floors outdoors, stone, slate, sandstone, coarse and porous surfaces in general. It is a product ready to use and has a satin finish. Quick drying. p>
Technical data h3>
- Total yield: With a liter of 3 m2 in manual floors and 5 m2 in mechanical floors li>
- Finish: Satin.
- Application: Brush, Roller (fine foam), Gun. li>
- Useful cleaning: Water. li>
Properties
It is a new manufactured based on different components to water, non-polluting, non-flammable, odorless and of a good resistance to the outside, to the friction, to the use, to the water, and of very easy application with a brush, a fine foam roller or a gun. . It does not scale or make skins.
When applied it prevents the water from penetrating and creates mold, in addition it gives consistency by fixing the surface and avoiding the wear of the same as well as that of the joints.
Ways of use
Let the work dry for 30 days in summer and 60 days in winter, in case of cement-tail it will be enough with 5 days.
Use only on mud pavements and new surfaces that do not have any product applied, clean with our Morafond Cleaning, rinse thoroughly with water, let it dry for 5 to 8 days in summer and 10 to 12 days in winter according to room temperature. 2.º- Apply a prijust layer of MORAKRON abundant and well distributed, and let dry 3 to 4 hours. Care very well in the first layer that the product is well covered and distributed. 3.º- In very absorbent pavements a second light layer will be applied. Cleaning tools with water as quickly as possible.
On surfaces with less absorption, such as slate, etc., apply a well-distributed layer and, if necessary, apply a 2nd layer.
RULES:UNE 23727-90 Reaction to fire M-1 on support M-0. (not flammable) p>
The information provided in this data sheet is the result of our laboratory research and actual application experiences. However, given that frequently the products are used in conditions beyond our control, we can not guarantee more than the good result of the product as long as its application and use are correct.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Satin
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Ceramic Surfaces
- Directly
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8436005131210
No customer questions for the moment.