Protective oil 2 in 1 500 ml Crea by Montó
Protector for garden furniture and platforms. Formulated with nanotechnological additives and water-based resins of the latest generation, combined with oils that penetrate and nourish the wood, maintaining its natural appearance. Resistant to the weather, with UV filters. Easy application and maintenance. Low smell
You might also like
Related Products ( 16 other products in the same category )
Description h3>
Protector for garden furniture and platforms. Formulated with nanotechnological additives and water-based resins of the latest generation, combined with oils that penetrate and nourish the wood, maintaining its natural appearance. Resistant to the weather, with UV filters. Easy application and maintenance. Low smell
Technical data h3>
- Matte finish
- Specific weight: 0.99 ± 0.05 kg / l
- Viscosity: 13 +/- 2 SG
- Solids in volume: 13 ± 1
- Solids by weight: 14 ± 1
- VOC Cat. E / BA 150/130 (2007/2010): 4.90 g / l
- Performance approx. per hand 10-14 m² / L li>
- Touch drying (20ºC HR: 60%): 30 - 60 min. li>
- Repainting (20ºC HR: 60%): 6-12 h li>
Properties
- Power of penetration li>
- For maximum exterior protection apply with color
- Good water resistance
- Does not leave film on the surface li>
- Easy to apply
- No Quartz - Microporous
- UV resistance
- Good adhesion
- Excellent protection against climatic factors
- Product ready to use. Do not dilute
Preparing the support h3>
New supports
New woods:
- The support must be free of foreign products and / or waste. li>
- Apply on woods with a moisture content of less than 20%.
- Apply on healthy woods, well degreased, dust-free and dry.
- Sanding and eliminating possible traces of glue in the assemblies and machining faults.
- If the wood shows signs of aging it must be previously sanded and the dust removed by brushing or any other mechanical means li>
Restoration and maintenance strong>
Varnished or painted woods:
- If they have been varnished with lasures or similar, to eliminate areas badly adhered or in poor condition, it is recommended to sand lightly, remove the dust resulting from sanding and proceed as on new woods.
- If they have been varnished with cellulose or polyurethane varnishes, remove by means of pickling or by mechanical means and proceed as on new wood.
- If they have been enameled with synthetic enamel remove by means of pickling or by mechanical means and proceed as on new woods.
- If they have been treated with nutrients or Protective Oil is applied directly.
How to use
Application tips: strong>
- Stir the product until its perfect homogenization. li>
- Apply on clean and dry substrates.
- Apply following the dilutions recommended in the section Application Systems. li>
- Pre-sanding to ensure good penetration and equalizationNo on wood.
- Do not apply the product at high temperatures or on surfaces exposed to strong sunlight. li>
- Maintain good ventilation conditions during the drying time. li>
- Do not apply with relative humidity greater than 80%.
Notice
The colors are approximate and may vary depending on the computer screen you are using. p>
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 3 - 4 h
- Time for repainting at 23ºC and 60% RH
- 30 min
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8422466378103
No customer questions for the moment.