KISS Universal filler 2C URKIFAST Gray BESA

Universal filler 2C URKIFAST Gray BESA

6,15VAT included
Size container
Disponibilidad In stock

1 review

You might also like

Related Products ( 6 other products in the same category )


Polyester Putty intended for the filling of dents and other body irregularities. It stands out for its adhesion, filling power and flexibility. Usable in the painting of the automobile and industrial vehicle. Adhesion on galvanized steel and electrozinc.

Technical data

  • Density 20ºC (g / cc): 1,85 ± 0,05
  • Grinding fineness (μ): No lumps
  • Viscosity of supply at 20ºC: Thixotropic
  • % Non-volatile matter (weight / volume) 85% ± 2 weight; (Mixture with Catalyst)
  • VOC (g / l): 250 (Ready to use) - (2004/42 / CE) IIB (B) (250)
  • Type of product: Polyester
  • Color: Gray 7035

Surface Preparation

The surface to be repaired must be deoxidized and free of grease; we recommend a previous sanding of the same on steel. On electro-zinc StarBrite.

Do not use Putty on WASH-PRIMER or Phosphorous Primers.

Recoatable with any finish once sealed, preferably with Acrylic 2 Comp., BESA-CAR or BESA-EXPRESS.

Application mode

Application: A spatula.

Note: Catalyst should not be added excessively to avoid subsequent bleeds.

The catalyst mixture can be made on the same spatula, homogenizing well before applying.

Characteristics of the dry film

Theoretical yield (m² / l)

Shine 60º-60º Mate

Recoatability 1 - 2 h.


Keep under cover in a cool and ventilated place, avoiding direct exposure to sunlight. We advise temperatures between 5 and 30 ºC.

Duration in the package: At least 12 months from its manufacture. After this time consult with n / Dept. of Technical.



8 Items

Data sheet

Kind of product:
Degree of Brightness
Sanding between layers
Dry to Touch at 23ºC and 60% RH
20 min
Time for repainting at 23ºC and 60% RH
30 min
Number of Components
2 components
Mix ratio
2 g of catalyst per 100 g of putty
Life of the mixture at 23ºC and 60% RH
4 min
Type Application:
A Spatula
Danger for transport:
Innocuous, without restrictions
Infrared drying time
5 min

Specific References

View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
  • No inducements have been provided for these reviews
  • Reviews are published and kept for a period of five years
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
  • The reasons for deletion of reviews are available here.

5 /5

Based on 1 customer reviews

  • 1
  • 2
  • 3
  • 4
  • 5
Sort reviews by :

Michel L. published the 27/09/2020 following an order made on 28/02/2020


Bon mastic facile à travailler

Did you find this helpful? Yes 0 No 0

From Ian Potts | 2019-06-24 21:14:59

Is this product ok to use to seal a leak on a petrol tank off a motorcycle. Cheers Ian


Is much better to cover the tank with epoxy resin. This product is not suitable for that porpouse.

Page: 1

Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form

New Account Register

Already have an account?
Log in instead Or Reset password