Single-component URKI-FILLER Gray 1L BESA
Related Products ( 9 other products in the same category )
Acrylic equipment used in repair processes for Industrial Vehicles, equipment and machinery in general. Applicable on primers, polyester putties or directly on sanded sheet. It presents great power of filling, equalization and speed of drying; easy to sand, which added to its excellent recoatability allows very short work times. "EXCLUSIVE USE IN INDUSTRIAL FACILITIES"
Technical data h3>
- Density 20ºC (g / cc): 1,34 ± 0,02
- Grinding fineness (μ): 25 - 35 li>
- Viscosity of supply at 20ºC: 110 - 120 KU (Stormer) li>
- % Non-volatile matter (weight / volume) 57% ± 2 weight; 35% ± 2 vol.
- VOC (g / l) 574
- Type of product: Acrylic li>
- Color: Gray 7035
Preparation of the surface h3>
On old paintings, well adhered and sanded. Do not apply on thermoplastic acrylic enamels.
For Veneer: Degreasing and rust removal; on Polyester Putty 2 c. Apply directly after sanding.
Recoatable with URKI-LAC, URKI-FLEX, URKI-NATO, URKI-GLASS and BESA-GLASS.
Application mode h3>
Step 1.8-2.5 mm. ø p>
For higher layer applications, 80-100 m, dilute to ~ 90 sec. F4
Drying time: 20 min.
Infrared drying: 10 - 15 min.
Characteristics of the dry film
Theoretical yield (m² / l) 6 - 7 (50 m)
Brightness 60º-60º: Mate
Repaintability: 2 h. (For maximum gloss of the Finish coat the next day)
Keep under cover in a cool and ventilated place, avoiding direct exposure to sunlight. We advise temperatures between 5 and 30 ºC.
Duration in the package: At least 2 years from its manufacture. After this time consult with n / Dept. of Technical.
- Kind of product:
- Theoretical yield per hand (m2 / L):
- Number of recommended hands:
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 1 h for sanding
- Time for repainting at 23ºC and 60% RH
- 10 minutes
- Number of Components
- 1 component
- Type Application:
- By gun
- Paint Iron or Steel
- Danger for transport:
- Prohibited Air Transportation