Acrylic spray varnish BESA-GLASS HS 2C BESA
Related Products ( 10 other products in the same category )
Acrylic varnish of 2 components to perform partial repairs with Bi-layer Systems. It stands out for its resistance to scratching, gasoline and good behavior to the exterior, as well as for its speed of drying and leveling. The finish that is achieved is the same as with conventional 2 c varnishes. of use with a gun. It has a deposit in the lower part that when activated mixes the two components to apply the varnish.
- Type of product: Acrylic li>
- Transparent color
- VOC (g / l) 642 (Ready to use in Spray) - (2004/42 / CE) IIB (E) (840) ç li>
Preparation of the surface h3>
It is applied directly on Bi-layer Funds (both Solvent Base and Water Base), after at least 30 minutes from the application of the Fund. p>
Application mode h3>
Steps to follow for the Base / Catalyst mixture:
- Remove the lid located on the lower base and take the ring placed on the lid li>
- Insert the ring through the hole provided for this in the lower base of the container.
- Once the ring is introduced, turn it 360º li>
- Pull the ring in the opposite direction to the container to activate the mixture li>
Apply in two hands ofjando 5 - 10 min. between layers.
After use, invert the container and press to clean the nozzle (life of the mixture 24 h.) p>
Painting distance: 20 - 30 cms.
Mix life: 24 hours
Dry to the touch: 30 min.
Drying time: 3 hours
Infrared drying: 12 - 15 min
Characteristics of the dry film
60º-60º brightness: 100%
Repaintability: 24 h.
Keep under cover in a cool and ventilated place, avoiding direct exposure to sunlight. We advise temperatures between 5 and 30 ºC. CAUTION: Under no circumstances should the containers exceed 50ºC. Duration in the package: At least 18 months from its manufacture. After this time consult with n / Dept. Technical.
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- High brightness
- Number of recommended hands:
- Dry to Touch at 23ºC and 60% RH
- 1 h for sanding
- Time for repainting at 23ºC and 60% RH
- 10 minutes
- Number of Components
- 2 components
- Mix ratio
- 2 parts of paint per 1 of catalyst
- Life of the mixture at 23ºC and 60% RH
- 2 h
- Type Application:
- Paint Plastic
- Danger for transport:
- Prohibited Air Transportation