Phosphate Primer Shop Shop F-714 BESA
Phosphochromative primer of 1 c. of excellent adhesion on Steel. On Aluminum or Zinc plated we recommend previous proof. Its fast drying, its recointability with all kinds of finishes in wet-on-wet processes orients this product to those markets that require speed in the process. Suitable for Machine Tool, Industrial Bodywork, usable as a shop primer for its resistance to oxidation. Resistance is obtained in Salt fog of up to 300 hours when it is coated with PUR finishes. It can be dried at temperatures of 160ºC. It is weldable and does not give off toxic fumes.
You might also like
Related Products ( 8 other products in the same category )
Description h3>
Phosphochromative primer of 1 c. of excellent adhesion on Steel. On Aluminum or Zinc plated we recommend previous proof. Its fast drying, its recointability with all kinds of finishes in wet-on-wet processes orients this product to those markets that require speed in the process. Suitable for Machine Tool, Industrial Bodywork, usable as a shop primer for its resistance to oxidation. Resistance is obtained in Salt fog of up to 300 hours when it is coated with PUR finishes. It can be dried at temperatures of 160ºC. It is weldable and does not give off toxic fumes.
Dtechnical atos
- Density 20ºC (g / cc): 0.95 - 1.00 li>
- Grinding fineness (μ): 10 - 20 li>
- Viscosity of supply at 20ºC 50 - 70 "Ford nº 4
- % Non-volatile matter (weight / volume) 23 - 28% weight; 13% ± 2 vol.
- VOC (g / l) 774 (Ready to use) - (2004/42 / CE) IIB (C) (780)
- Type of product: Modified vinyl li>
- Color: Medium gray 1220
Preparation of the surface h3>
The surface to be painted should be free of grease and rust. It is necessary an excellent degreasing and to make a careful preparation of the surface. When the surfaces to be protected are going to be out in the open for long periods of time, we recommend the application of two hands. Recoatable with URKI-POX, BESA-GLASS, URKI-NATO, URKI-PUR, BESA-PUR, URKI-TEXT, URKI-VOC
Application mode h3>
It is not recommended to apply polyester mastics on phosphochromative primers, since with this system there are hardening and drying problems. A Immersion: URKISOL - 300
Characteristics of the dry film
Theoretical yield (m² / l): 12 - 14 (10 m)
Brightness 60º-60º: Satinado 5 - 25%
Repaintability: 1 h.
Storage
Keep under cover in a cool and ventilated place, avoiding direct exposure to sunlight. We advise temperatures between 5 and 30 ºC. Duration in the package: At least 2 years from its manufacture. After this time consult with n / Dept. of Technical.
Data sheet
- Kind of product:
- Primer
- Degree of Brightness
- Satin
- Theoretical yield per hand (m2 / L):
- 13
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 1 h for sanding
- Time for repainting at 23ºC and 60% RH
- 10 minutes
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Iron or Steel
- Directly
- Paint Aluminum, Brass or Copper
- Directly
- Paint Galvanized Steel
- Directly
- Danger for transport:
- Prohibited Air Transportation
- Viscosity Ford Cup 4 (seconds)
- 15-18
- Evaporation solvents
- 10 minutes
Specific References
- ean13
- 8435099912804
No customer questions for the moment.