• -50%
Xylazel Antioxidant paint Oxirite Xtrem Forge 750ml Xylazel

VIDEOS

Paint for iron Oxirite Xtrem 750ml Xylazel

€18.90
9,45VAT included Save 50%

Water-resistant antioxidant enamel applied directly to the metal without previous priming in different finishes and colors. It incorporates special raw materials such as a new generation hydrophobic acrylic resin, which gives it a high resistance to corrosion, moisture and water, as well as excellent adhesion on different substrates.

Colour
Selected color: Grey
Quantity DisponibilidadOut-of-stock

You might also like

Related Products ( 16 other products in the same category )

Description h3>

Water-resistant antioxidant enamel applied directly to the metal without previous priming in different finishes and colors. It incorporates special raw materials such as a new generation hydrophobic acrylic resin, which gives it a high resistance to corrosion, moisture and water, as well as excellent adhesion on different substrates.

Technical data h3>

  • Density at 20º C  approx. 1.38 ± 0.1 g / mL
  • Drying: 1 hour
  • Repainted: 2 hours

performance

Forging: 8-10 m² / L and hand. About 4-5 m² / L, applying a minimum thickness of 100 microns dry. According to the tests carried out in the Laboratorio de Tecnalia according to ISO 12944-6, with 100 microns dry, it meets the criteria established for atmospheric environments C3 high-C4 medium.

According to the standard ISO 12944-5 in urban and industrial atmospheres, with moderate sulfur dioxide pollution and coastal areas with low salinity, with 100 microns dry (about 4 m² / L) the product would have an estimated durability beyond 15 years . In industrial areas and coastal areas with moderate salinity with 100 microns, the estimated durability is up to 15 years. In coastal and maritime areas with high salinity with 100 microns, the estimated durability is 2 to 5 years.

Caracteristics

  • Direct application on metal, without primer.
  • It can be applied on surfaces oxygiven, previously eliminating loose particles. li>
  • Brilliant finish, satin and forge.
  • High resistance to corrosion li>
  • Good adhesion on different surfaces.
  • Drying very fast. li>
  • Easy to apply. li>
  • Weak smell that disappears when dry. li>
  • Water base

Fields of application h3>

Surfaces of ferrous and non-ferrous metals: steel, galvanized, aluminum, etc.

How to use

New Surfaces:

Clean and degrease to remove the remains of oils and dirt present on the surface. In the case of metal sheets with fats and oils, these must be completely removed by the use of alkaline detergents (for aluminum surfaces they must be neutral) or appropriate solvents. Surfaces must be completely degreased to ensure good adhesion and maximum anticorrosive effectiveness.

Painted surfaces:

Apply on clean surfaces, free of oils and fats and dry. The painted surfaces that are dirty should be washed with water, detergent and brush, washing the soap well at the end. This process can be done with pressurized water. Remove non-adhering paints, pickling, scratching or sanding. With the help of a hammer or chisel it is removedrust crusts, scales and welding residues or slag adhered to oxidized iron elements. If the surface also presents areas of corrosion, it should be scraped with a metal brush or an abrasive grinder until all the rust and loose scale is removed. Grade St-2 (UNE-EN-ISO 12944-4). To remove dust particles that the surface could have before painting, you must clean them with a brush or a brush. This work can also be done by applying a clean, dry jet of air to the surface. In the case of boards and electrical and pneumatic instruments, a vacuum cleaner will be used. On surfaces painted with oil enamels that have not been exposed to the weather, it is advisable to sand the surface to improve adhesion. It is not necessary to apply an anticorrosive or adherent primer. When masking tapes (bodybuilders' tapes) are used, they must be peeled off before the paint has finished drying (30-60 min). If the paint has already dried and formed a film consistent with the tape, it should be removed by cutting the edges with a knife.

8414956707845

Xylazel https://pinturas-dami.com/img/m/3.jpg

11057
0 Items

Data sheet

Kind of product:
Finishing paint or final coat
Degree of Brightness
Forging
Theoretical yield per hand (m2 / L):
9
Dry to Touch at 23ºC and 60% RH
1 hour
Diluent / Cleaning:
Water
Paint Iron or Steel
Directly
Paint Aluminum, Brass or Copper
Directly
Paint Galvanized Steel
Directly
Danger for transport:
Innocuous, without restrictions

Specific References

ean13
8414956707845

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password