Oxirite antioxidant paint Xtrem Mate 750ml Xylazel
Antioxidant enamel to the water of direct application on the metal without previous priming. It incorporates special raw materials such as a new generation hydrophobic acrylic resin, which gives it a high resistance to corrosion, moisture and water, as well as excellent adhesion on different substrates.
You might also like
Related Products ( 16 other products in the same category )
Description h3>
Water-resistant antioxidant enamel applied directly to the metal without previous priming in different finishes and colors. It incorporates special raw materials such as a new generation hydrophobic acrylic resin, which gives it a high resistance to corrosion, moisture and water, as well as excellent adhesion on different substrates.
Technical data h3>
- Density at 20º C approx. 1.20 ± 0.2 g / mL
- Drying: 1 hour
- Repainted: 2 hours
performance
Mate: 8-10 m² / L and hand. About 4-5 m² / L, applying a minimum thickness of 100 microns dry. According to the tests carried out in the Laboratorio de Tecnalia according to ISO 12944-6, with 100 microns dry, it meets the criteria established for atmospheric environments C3 high-C4 medium.
According to the standard ISO 12944-5 in urban and industrial atmospheres, with moderate sulfur dioxide pollution and coastal areas with low salinity, with 100 microns dry (about 4 m² / L) the product would have an estimated durability beyond 15 years . In industrial areas and coastal areas with moderate salinity with 100 microns, the estimated durability is up to 15 years. In coastal and maritime areas with high salinity with 100 microns, the estimated durability is 2 to 5 years.
Caracteristics
- Direct application on metal, without primer.
- It can be applied on surfaces oxygiven, previously eliminating loose particles. li>
- Matte finish.
- High resistance to corrosion li>
- Good adhesion on different surfaces.
- Drying very fast. li>
- Easy to apply. li>
- Weak smell that disappears when dry. li>
- Water base
Fields of application h3>
Surfaces of ferrous and non-ferrous metals: steel, galvanized, aluminum, etc.
How to use
New Surfaces:
Clean and degrease to remove the remains of oils and dirt present on the surface. In the case of metal sheets with fats and oils, these must be completely removed by the use of alkaline detergents (for aluminum surfaces they must be neutral) or appropriate solvents. Surfaces must be completely degreased to ensure good adhesion and maximum anticorrosive effectiveness.
Painted surfaces:
Apply on clean surfaces, free of oils and fats and dry. The painted surfaces that are dirty should be washed with water, detergent and brush, washing the soap well at the end. This process can be done with pressurized water. Remove non-adhering paints, pickling, scratching or sanding. With the help of a hammer or chisel the oxide crusts will be removedor, scales and remains of welding or slag adhered to rusted iron elements. If the surface also presents areas of corrosion, it should be scraped with a metal brush or an abrasive grinder until all the rust and loose scale is removed. Grade St-2 (UNE-EN-ISO 12944-4). To remove dust particles that the surface could have before painting, you must clean them with a brush or a brush. This work can also be done by applying a clean, dry jet of air to the surface. In the case of boards and electrical and pneumatic instruments, a vacuum cleaner will be used. On surfaces painted with oil enamels that have not been exposed to the weather, it is advisable to sand the surface to improve adhesion. It is not necessary to apply an anticorrosive or adherent primer. When masking tapes (bodybuilders' tapes) are used, they must be peeled off before the paint has finished drying (30-60 min). If the paint has already dried and formed a film consistent with the tape, it should be removed by cutting the edges with a knife.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 9
- Diluent / Cleaning:
- Water
- Paint Iron or Steel
- Directly
- Paint Aluminum, Brass or Copper
- Directly
- Paint Galvanized Steel
- Directly
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414956719985
No customer questions for the moment.