Coating 100% pure acrylic White matt 15L R40 Titan Pro

Description

Acrylic coating high resistance to weathering, friction and washing. Indicated to obtain the best protection in facades walls and walls where a high decoration finish is required. Suitable to cover small cracks. With anti-mold preservative and antiverdin. Breathable Raincoat. Anticarbonatation. Colors totally solid to light. Great cover. Protection extreme climates. Guarantee 12 years upon request and prescription.

Technical data

• Nature: Acrylic
• Matte finish
• Color (UNE EN ISO 11664-4): White and colors on request + TITAN Bases
• Color: Intermediate and Neutral
• Density (UNE EN ISO 2811-1): White: 1.44 - 1.48 Kg / l / Colors: 1.30 - 1.48 Kg / l
• Performance (UNE 48282): 6 - 15 m2 / l
• Drying at 23ºC 60% RH (UNE 48301): 30 - 60 minutes
• Repainted at 23ºC 60% RH (UNE 48283): 6 - 8 hours
• Application Methods: Brush, roller and gun
• Thinner: Water
• Application Conditions, HR 80% +10 ºC - +30 ºC
• Tinted Universal Tint TITAN, Professional Water Tint or TITANCOLOR
• Solid Volume (UNE EN ISO 3233-3) White: 44 - 45% / Color: 42 - 47%
• VOC (UNE EN ISO 11890-2) 2.004 / 42IIA (c) (75/40) Max. VOC 22 g / l.

* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in drying, performance or other properties.

Certificationnes

Wet rub resistance UNE EN ISO 11998: Class 1, 200dp Lost 5 μ

Adherence by direct traction (without traffic loads) UNE-EN 1542: 1999:> 1,8 (0,7) b N / mm2

Permeability to liquid water UNE EN 1062-3: w 0.1 kg .m2.h 0.5 (W3)

CO2 permeability UNE EN 1062-6: SD> 50 m (C1)

Water vapor permeability UNE EN ISO 7783: s / EN 1504-2 standard: Class I: SD 5 m (s / EN 1062-1: V2 standard)

How to use

GENERAL RECOMMENDATIONS:

Stir well in the container. The surfaces to be painted must be clean, dry and consistent.

VERY IMPORTANT ATTENTION. DO NOT APPLY:

At temperatures below 7º C. With relative humidity greater than or equal to 80%. With forecast of rain in the next hours. If these instructions are not respected, the result of the application may not be satisfactory, stains of different colors may appear, tearing (snail slime, etc.). Industrias TITAN, SAU will not accept any claim that has not taken into account these instructions. Pay special attention to those dark colors, because some of them are more susceptible to the occurrence of the above-mentioned phenomena, reason for more to observe the indicated indications and precautions.

SURFACES NOT PREPARED:

On surfaces in good condition: apply a first coat diluted with 10 - 15% of water, applying a second layer undiluted. On surfaces in poor condition: sanitize all laffected areas, eliminating all material that is not well adhered and consistent, cleaning all dirt and dust that may have. To consolidate substrate and homogenize porosity or on tempera paints, glue, lime or on surfaces where they have been removed: apply a first layer of S20 Primer Superfixing Acrylic Primer or S30 Primer Fixing Siloxane according to the indications of their respective technical sheets.

MAINTENANCE OF PAINTED SURFACES IN GOOD CONDITION:

Directly apply the previously washed or brushed paint, diluting the first layer with 10 - 15% water, then apply the second layer as is p>

MAINTENANCE OF ALREADY PAINTED SURFACES IN BAD CONDITION:

Completely remove the old paints and proceed as on unprepared surfaces. p>