TR Siloxane Coating White matt 15L R60 Titan Pro
Painting for siloxane facades. Water-repellent Total vapor permeability. Great durability With anti-mold preservative and antiverdin. Good penetration in the support. For the protection of facades of buildings in which it is desired to have a correct waterproofing and also a high breathability. Repels water and dirt Great resistance to the weather. Guarantee 12 years upon request and prescription.
Related Products ( 3 other products in the same category )
Description
Painting for siloxane facades. Water-repellent Total vapor permeability. Great durability With anti-mold preservative and antiverdin. Good penetration in the support. For the protection of facades of buildings in which it is desired to have a correct waterproofing and also a high breathability. Repels water and dirt Great resistance to the weather. Guarantee 12 years upon request and prescription.
Technical data
- Nature: Silicone
- Matte finish
- Color (UNE EN ISO 11664-4): White and range colors
- Density (UNE EN ISO 2811-1): White: 1.44 - 1.50 Kg / l / Colors: 1.43 - 1.47 Kg / l
- Performance (UNE 48282): 4 - 6 m² / l
- Drying at 23ºC 60% RH (UNE 48301): 30 - 60 minutes
- Repainted at 23ºC 60% RH (UNE 48283): 6 - 8 hours
- Application Methods: Brush and roller
- Thinner: Water
- Application Conditions, HR 80% +10 ºC - +30 ºC
- Solid Volume (UNE EN ISO 3233-3) White: 36 -37% / Colors: 35.5 -37.5%
- VOC (UNE EN ISO 11890-2) 2004/42 / IIA (c) (75/40) Max. VOC 39 g / l
* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in drying, performance or other properties.
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. The surfaces to be painted must be clean, dry and consistent.
VERY IMPORTANT ATTENTION. DO NOTAPPLY:
At temperatures below 7º C. With relative humidity greater than or equal to 80%. With forecast of rain in the next hours. If these instructions are not respected, the result of the application may not be satisfactory, stains of different colors may appear, tearing (snail slime, etc.). Industrias TITAN, SAU will not accept any claim that has not taken into account these instructions. Pay special attention to those dark colors, because some of them are more susceptible to the occurrence of the above-mentioned phenomena, reason for more to observe the indicated indications and precautions. Preserve containers under freezing temperatures.
SUPERPREPARATIONS NOT PREPARED:
Apply a first layer diluted with 10 - 15% of water, applying a second one undiluted. On surfaces in poor condition: clean all affected areas, removing all material that is not well adhered and consistent, cleaning all dirt and dust that may have. To consolidate substrate and homogenize porosity or on tempera paints, glue, lime or on surfaces where they have been removed: it is advisable to apply S20 Super Penetrant Fixing Primer Acrylic or S30 Primer Fixing Siloxane.
MAINTENANCE OF PAINTED SURFACES IN GOOD CONDITION:
Apply directly the previous painting washed or brushed, diluting the first layer with 10-15% of water, then apply the second layer as is p>
MAINTENANCE OF ALREADY PAINTED SURFACES IN BAD CONDITION:
Completely remove the old paints and proceed as on unprepared surfaces. p>
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 5
- Dry to Touch at 23ºC and 60% RH
- 30 - 60 min
- Time for repainting at 23ºC and 60% RH
- 6 - 8 a.m.
- Diluent / Cleaning:
- Water
- Type Application:
- With brush or roller
- Place of application
- Only Exterior
- Danger for transport:
- Innocuous, without restrictions
No customer questions for the moment.