Paint specially formulated based on acrylic copolymer of high resistance to the exterior. For facades of stone, brick, plaster, lime, cement, concrete, fiber cement, etc. Suitable for pulverulent surfaces (caleadas) and when it must be painted in unfavorable atmospheric conditions (frost, low temperatures, intermittent rains, etc.). Prevents efflorescence. Resistant to alkalis. Anti snail slime and tearing. With anti-mildew preservative. Extreme weather protection 15 years warranty upon request and prescription
Coating Pliolite Titania Matt white 10L R70 Titan Pro
144,85€VAT included
Paint specially formulated based on acrylic copolymer of high resistance to the exterior. For facades of stone, brick, plaster, lime, cement, concrete, fiber cement, etc. Suitable for pulverulent surfaces (caleadas) and when it must be painted in unfavorable atmospheric conditions (frost, low temperatures, intermittent rains, etc.). Prevents efflorescence. Resistant to alkalis. Anti snail slime and tearing. With anti-mildew preservative. Extreme weather protection 15 years warranty upon request and prescription
Related Products ( 5 other products in the same category )
Description
Paint specially formulated based on acrylic copolymer of high resistance to the exterior. For facades of stone, brick, plaster, lime, cement, concrete, fiber cement, etc. Suitable for pulverulent surfaces (caleadas) and when it must be painted in unfavorable atmospheric conditions (frost, low temperatures, intermittent rains, etc.). Prevents efflorescence. Resistant to alkalis. Anti snail slime and tearing. With anti-mildew preservative. Extreme weather protection 15 years warranty upon request and prescription
Technical data
- Nature: Acrylic
- Matte finish
- Color (UNE EN ISO 11664-4): White and colors on request
- Density (UNE EN ISO 2811-1): 1.56 - 1.62 Kg / l
- Performance (UNE 48282): 6 - 12 m2 / l
- Drying at 23ºC 60% RH (UNE 48301): 1h 30min - 2 hours
- Repainted at 23ºC 60% RH (UNE 48283): 6 hours
- Application Methods: Brush and roller
- Cleaning of Utensils: Solvent for TITAN Synthetics
- Application Conditions, HR 80% -20ºC - +40ºC
- Dyeing: TITAN Universal Tint. Maximum 5% in volume
- Flash Point (UNE EN ISO 3679): 41ºC
- Solid Volume (UNE EN ISO 3233-3): 57.5 - 58.5%
- VOC (UNE EN ISO 11890-2) 2004 / 42IIA (c) (450/430) Max. VOC 430 g / l.
* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in the sEcado, performance or other properties. p>
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. The surfaces to be painted must be clean, dry and consistent. UNPREPARED SURFACES: Apply one coat of R70 Titanium Pliolite coating. Let dry and apply a second coat. If the surface is calcined and powdery, apply a pre-coat of S20 Primer Super Acrylic Primer.
MAINTENANCE OF PAINTED SURFACES IN GOOD CONDITION:
Wash, sand lightly and apply directly.
MAINTENANCE OF ALREADY PAINTED SURFACES IN BAD CONDITION:
Remove completely and proceed as on unprepared surfaces. p>
21680
1 Item
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 9
- Dry to Touch at 23ºC and 60% RH
- 1.5 - 2 h
- Time for repainting at 23ºC and 60% RH
- 6 a.m.
- Diluent / Cleaning:
- Synthetic solvent
- Type Application:
- With brush or roller
- Place of application
- Interior and Exterior
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form