Primer Antioxidant Multiadhente S70 Titan Pro
Multi-adherent primer antioxidant drying and fast repainting, which allows putting into service within a few hours of painting. Good brochability and ease of sanding. On wood and non-alkaline porous surfaces (plaster, plasterboard) has a great filling power. Low smell Universal primer for sealing all types of surfaces indoors and outdoors, in moderate corrosion environments.
Related Products ( 6 other products in the same category )
Description
Multi-adherent primer antioxidant drying and fast repainting, which allows putting into service within a few hours of painting. Good brochability and ease of sanding. On wood and non-alkaline porous surfaces (plaster, plasterboard) has a great filling power. Low smell Universal primer for sealing all types of surfaces indoors and outdoors, in moderate corrosion environments.
Technical data
- Nature: Modified Alkyd
- Matte finish
- Color (UNE EN ISO 11664-4): White, red and gray
- Density (UNE EN ISO 2811-1): 1.30 - 1.35kg / l
- Performance (UNE 48282): 8 - 12 m2 / l
- Drying at 23ºC 60% RH (UNE 48301): 30 - 60 minutes
- Repainted at 23ºC 60% RH (UNE 48283): From 4 hours
- Application Methods: Brush, roller and gun
- Cleaning of Utensils: Synthetic and fatty solvents
- Application Conditions, HR 80% +10 ºC - +30 ºC
- Flash Point (UNE EN ISO 3679): 46 ºC
- Solid Volume (UNE EN ISO 3233-3): 47 - 49%
- COV (UNE EN ISO 11890-2) 2.004 / 42IIA (i) (600/500) Max.VOC 480 g / l
* Variations of temperature, humidity, thickness, dyeing or type of support, etc., can cause changes in drying, performance or other properties.
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. The surfaces to be painted must be clean,cas, degreased and consistent.
SURFACES NOT PREPARED:
Steel:deoxidizing by abrasive blasting to grade Sa 2½ of ISO 8501-1 or manual or mechanical cleaning to grade ST3 of the same standard. Degrease and remove dust and rust residues. Apply 2 coats and allow to dry thoroughly before applying the finishing coats, according to specifications.
Non-ferrous metals in interiors:clean with water and ammonia detergent. Lijando smoothly improves adhesion. Apply 1 preparation layer. In humid areas, apply 2 coats of preparation.
Wood:sanding the wood in the direction of the veins, cleaning thoroughly, removing resins or secretions of resins and killing live songs. Apply a first coat, sand and remove the dust. Apply a second coat to achieve a uniform surface, sanding smoothly. Finish with the Colorlux Glaze. Outdoors protect the wood by previously applying Titanxyl Ultra Total Protection, according to needs.
Non-alkaline porous surfaces (plaster ...): apply directly. If the surface is powdery, first apply a coat of S20 Super Penetrant Acrylic Primer. If the finish has to be colored, dye with TITAN Universal Tint, being sufficient in most cases, a single layer of final product. Between 2 - 4 hours, repair defects with synthetic mastics. Review then withS70 Antioxidant Multi-adherent Primer. Allow to dry thoroughly (4 - 8 hours) before applying the finishing paint.
MAINTENANCE OF PAINTED SURFACES IN GOOD CONDITION:
In the case of poorly adhered systems, and / or with the presence of rust, remove by abrasive blasting the grease Sa 2½ of the ISO 8501-1 standard or manual or mechanical cleaning to the ST 3 grade of the same standard. Patch then with the primer. If the poorly adhered surface is extensive, proceed as on unprepared surfaces, if not, apply a general coat of primer and then apply the finish according to specification.
MAREINFORCED SURFACES ALREADY PAINTED IN BAD CONDITION:
Remove completely and proceed as on unprepared surfaces. p>
Data sheet
- Kind of product:
- Primer
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 30 min
- Time for repainting at 23ºC and 60% RH
- 2 h
- Diluent / Cleaning:
- Universal Solvent
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Iron or Steel
- Directly
- Paint Aluminum, Brass or Copper
- Directly
- Paint Wood
- Directly
- Paint Fiber Polyester
- Directly
- Paint Galvanized Steel
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
- Antioxidant
- Yes
Specific References
- ean13
- 8414800410099
No customer questions for the moment.