Biosustainable Fixing Primer S90N 15L Titan Pro
Fine particle fixative, formulated with sustainability criteria. More than 65% of its components are in the category MRS (Material Reutilization Score), it does not contain volatile organic compounds, or biocidal agents, so it is indicated for users who may have developed an allergic sensitivity to these compounds. For sealing surfaces that have a very porous, dusty state (plasters, plaster), etc. It facilitates the application and improves the adhesion of paints and coatings, avoiding variations in the final finish due to absorption differences. Resistant to alkalis. Cradle to Cradle Certified: GOLD.
You might also like
Related Products ( 10 other products in the same category )
Description
Fine particle fixative, formulated with sustainability criteria. More than 65% of its components are in the category MRS (Material Reutilization Score), it does not contain volatile organic compounds, or biocidal agents, so it is indicated for users who may have developed an allergic sensitivity to these compounds. For sealing surfaces that have a very porous, dusty state (plasters, plaster), etc. It facilitates the application and improves the adhesion of paints and coatings, avoiding variations in the final finish due to absorption differences. Resistant to alkalis. Cradle to Cradle Certified: GOLD.
Technical data
- Stretched Acrylic Nature (100% Biobased)
- Color (UNE EN ISO 11664-4) Colorless
- Density (UNE EN ISO 2811-1) 1.03 - 1.07 Kg / l
- Yield (UNE 48282) 6 - 10 m² / l variable according to surface porosity
- Drying at 23 ° C 60% RH (UNE 48301) 1 hour
- Repainted at 23 ° C 60% RH (UNE 48283) 4 hours
- Application Methods Brush, roller and airless
- Dilution Up to 400% depending on support conditions
- Water Diluent
- Cleaning of Water Utensils
- Application Conditions, RH <80% + 10 ° C - +30 ° C. Do not apply with rain forecast in the next few hours
- VOC (UNE EN ISO 11890-2) 2004/42 / IIA (h) (50/30) Max. VOC 0 g / l
- Presentation 15 l
* VariationsTemperature, humidity, thickness, dyeing or depending on the type of support, etc., may cause changes in drying, yield or other properties.
Certifications
Cradle to Cradle Certified: GOLD (LEED Credits)
https://www.c2ccertified.org/products/scorecard/p80-titan-natural-industrias-titan-sau
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container manually or with low speed agitator. The surfaces to be painted must be clean, dry and consistent. Do not apply on hot surfaces or in strong wind. A good diagnosis and support preparation are essential for obtaining the best results. Apply 1 or 2 layers according to the state of the surface.
On surfaces in poor condition, clean up all affected areas, removing all material that is not well adhered and cleaning all the dirt and dust they may have. On very porous surfaces apply a first layer conveniently diluted with water and a second one if deemed necessary./ p>
Precautions
Before using the product, read the package instructions carefully. For more information consult Safety Data Sheet. Store tightly closed containers sheltered from sources of heat and temperature below zero. Conservation: 36 months in original unopened container.
Waste Management: strong>
Follow local legal regulations. Help protect the environment amWell, do not throw the waste down the drain, deposit it at the nearest recycling center. Calculate the amount of product you will need and thus avoid waste and extra cost. Store excess product well stored for new use.
Before applying the product on a large surface area where scaffolding must be used to rise to more than two floor levels, it is essential that a TITAN After Sales technician visit to verify that the details of This technical sheet, that the state of the surface is verified, and that the recommendations be made in situ regarding the environmental and atmospheric conditions to achieve a perfect finish with guarantee. If these recommendations are not observed, Industrias TITAN, SAU will not be responsible for the good purpose of the application.
Data sheet
- Kind of product:
- Primer
- Theoretical yield per hand (m2 / L):
- 8
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 2-3 h
- Time for repainting at 23ºC and 60% RH
- 6 h
- Diluent / Cleaning:
- Water
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Pladur
- Directly
- Paint Plaster or Putty
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Innocuous, without restrictions
No customer questions for the moment.