White acrylic paint Biosustainable P80N 15L Titan Pro
Water wall and ceiling paint, formulated with sustainability criteria. More than 65% of its components are in the category MRS (Material Reutilization Score), it does not contain volatile organic compounds, or biocidal agents, so it is indicated for users who may have developed an allergic sensitivity to these compounds. Unchanging white, does not drip or splash. Highly decorated interior finishes. Maximum washability Cradle to Cradle Certified: GOLD.
You might also like
Related Products ( 16 other products in the same category )
Description
Water wall and ceiling paint, formulated with sustainability criteria. More than 65% of its components are in the category MRS (Material Reutilization Score), it does not contain volatile organic compounds, or biocidal agents, so it is indicated for users who may have developed an allergic sensitivity to these compounds. Unchanging white, does not drip or splash. Highly decorated interior finishes. Maximum washability Cradle to Cradle Certified: GOLD.
Technical data
- Stretched Acrylic Nature (100% biobased)
- Matte finish
- Color (UNE EN ISO 11664-4) White
- Density (UNE EN ISO 2811-1) 1.39 - 1.41 Kg / l
- Yield (UNE 48282) 8 - 10 m² / l (38 - 48 µ dry)
- Drying at 23 ° C 60% RH (UNE 48301) 30 - 60 minutes
- Repainted at 23ºC 60% RH (UNE 48283) 6 - 8 hours
- Application Methods Brush, roller and airless
- Viscosity (UNE 48076) 105 - 115 KU
- Water Diluent
- Recommended thickness (UNE EN ISO 2808) 76 - 96 µ dry in two layers
- Application Conditions, RH <80% +10 ºC - +30 ºC
- Dyed Only with TITANCOLOR System dyes
- Maximum Volume Coloring Paste Max 2%
- Volume Solids (UNE EN ISO 3233-3) 38 - 39%
- VOC (UNE EN ISO 11890-2) 2004/42 / IIA (a) (75/30) Max. VOC <1 g / l
* Variations in temperature, humidity, thickness, dyeing or according to tipor support, etc., may cause changes in drying, yield or other properties.
Certifications
Cradle to Cradle Certified: GOLD (LEED Credits)
https://www.c2ccertified.org/products/scorecard/p80-titan-natural-industrias-titan-sau
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container manually or with low speed agitator. The surfaces to be painted must be clean, dry and consistent. A good diagnosis and support preparation are essential for obtaining the best results. In dyed colors (Max 2%) once the color has been formulated, it is recommended to consume the entire package.
SURFACES NOT PREPARED:
On surfaces in good condition: apply a first layer diluted with 5% water, applying a second undiluted. On surfaces in poor condition: clean up all affected areas, removing all the material that is not well adhered and consistent, cleaning all the dirt and dust they may have and apply a first layer diluted with 5% water, applying a second one without dilute. To consolidate substrate and homogenize porosity or tempera paints, glue, lime or surfaces where they have been removed, it is advisable to apply a first layer of S90N BioSustainable Primer, according to the indications of its technical sheet.
MAINTENANCE SURFACES ALREADY PAINTED IN GOOD CONDITION:
Apply the paint directlyPrevious wash or brush. Dilute the first layer with 5% water, then apply the second one as is. p>
MAINTENANCE SURFACES ALREADY PAINTED IN BAD CONDITION:
Completely remove old paints and proceed as on unprepared surfaces.
Precautions
Before using the product, read the package instructions carefully. For more information consult Safety Data Sheet. Store tightly closed containers sheltered from sources of heat and temperature below zero. Conservation: 36 months in original unopened container.
Waste Management: strong>
Follow local legal regulations. Help protect the environment, do not throw the waste down the drain, deposit it at the nearest recycling center. Calculate the amount of product you will need and thus avoid waste and extra cost. Store excess product well stored for new use.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Theoretical yield per hand (m2 / L):
- 8
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 2-3 h
- Time for repainting at 23ºC and 60% RH
- 6 h
- Diluent / Cleaning:
- Water
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior Only
- Danger for transport:
- Innocuous, without restrictions
No customer questions for the moment.