Varnish Wood floors Shiny Xylazel
XYLAZEL VARNISH WOOD FLOORS is a product with polyurethane of a component, in a colorless, bright finish, specially developed for the protection and decoration of wood and cork in floors, parquets and floorboards.
You might also like
Related Products ( 14 other products in the same category )
Product description
XYLAZEL VARNISH WOOD FLOORS is a product with polyurethane of a component, in a colorless, bright finish, specially developed for the protection and decoration of wood and cork in floors, parquets and floorboards.
Technical data
- Density at 20 ° C: 0.88 - 0.90 g / mL
- Flash point:> 39ºC
- Brightness measurement: 20 °> 80
features
XYLAZEL VARNISH WOOD FLOORS provides the wood with a splendid matt, satin or gloss finish, highly effective and decorative.
- With permanent transparency
- Great ease of application.
- Very good leveling.
- Quick drying: Touch 2-4 hours.
- Very hard.
- Excellent hardness / elasticity ratio. It does not crack. It does not crack.
- Very transparent
- Not yellowing
- Modified alkyd resins with polyurethane
- Resistant to water and chemical cleaning agents, acids, fats. alcohols etc. Washable
- Excellent resistance to abrasion, friction and shock.
- High durability
- Final appearance vitrified type of great hardness.
- Very economical, thanks to its high performance. 13-16 m2 per liter with one hand according to wood types and conditions.
Fields of application
Excellent for the protection and decoration of wood, both newas restored, used as floorings and even coverings, furniture, doors and windows, where a high quality finish is necessary, according to the characteristics and properties of the product.
How to use
Preparation
Prior to varnishing, it is recommended that the wood be dry (relative humidity <15%), sanded and clean of substances that may damage the varnish film. We recommend applying, before varnishing, 1 or 2 coats of XYLAZEL FONDO to give effective protection against moisture, insects and fungi that can damage and damage the wood.
New wood
Apply two well-loaded undiluted hands, being recommended to sand between coats to achieve better adhesion and finish.
Woods already varnished
A) Varnish in good condition: Clean and sand the surface, subsequently applying 1 or 2 coats of XYLAZEL WOOD FLOOR VARNISH. B) Varnish in poor condition: Remove loose varnish (flaking) from the entire surface and proceed to varnish as if it were new wood. XYLAZEL VARNISH WOOD FLOORS has excellent adhesion, but very hard old varnishes can cause lack of adhesion. Make compatibility tests with old varnishes and if there is no adhesion remove the entire old layer. On floors that have been waxed or cleaned with brightener, remove the remains with solvent before applying XYLAZEL VARNISHWOODEN FLOORS.
Consumption
62 - 74 mL / m2 approximately, under normal conditions, undiluted and according to type of wood. We recommend 2 or 3 hands of the product.
Application p>
XYLAZEL BARNIZ WOOD FLOORS is presented ready for use. It can be applied by brush, brush, roller, airless and gun. Shake and stir the contents of the container well. Apply with a flat brush in the direction of wood grain. Once dry, approximately after 18 hours, give the 2nd hand.
To achieve a uniform effect and protection against decay and fungi, we recommend a previous hand of XYLAZEL FONDO. p>
In resin-rich woods, clean the surface resin with a nitro solvent before treatment with XYLAZEL VARNISH WOOD FLOORS.
The colors of the woods or the graying that they may have before applying XYLAZEL VARNISH WOOD FLOORS, influences the color tone of the finish. Close the container tightly when the product has been partially consumed. Proceed with the disposal and destruction of the container, in accordance with current legislation.
Properties and characteristics of treated wood strong>
Once the product is dry, it does not increase the flammability of the wood. p>
Maintenance
Old or new woods that have been previously treated with XYLAZEL VARNISH WOOD FLOORS or other type of varnish, and that after the time you needIn a new maintenance hand, they must be sanded, removing old product layers, although XYLAZEL on XYLAZEL can be applied directly.
Tool cleaning strong>
Use DILUYENTE XYLAZEL, white spirit or similar product. p>
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Brightness
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 1 h, stepping from 8 h
- Time for repainting at 23ºC and 60% RH
- 3 h
- Time for maximum hardness
- 3 days
- Diluent / Cleaning:
- Specific Solvent
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior Only
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414956014035
No customer questions for the moment.