Ecological water-based varnish Decoration Satin Titanlux

Ecological water-based varnish Decoration Satin Titanlux

Ecological water-based varnish Decoration Satin Titanlux

€9.30VAT included
  • Selected color: Caoba
  • Selected color: Nogal
  • Selected color: Roble
  • Selected color: Incoloro
  • Selected color: Teca
  • Selected color: Wengué
Selected color: Nogal
In stock

Quick drying satin water-based varnish. Resistant to household chemicals. Excellent blocking. Does not yellow. With anti-mold preservative. Great hardness, resistance and elasticity.

Description

Quick drying satin water-based varnish. Resistant to household chemicals. Excellent blocking. Does not yellow. With anti-mold preservative. Great hardness, resistance and elasticity.

Fields of application

For the protection and decoration of all kinds of wooden surfaces.

Technical characteristics

- Nature: Acrylic - Polyurethane

- Color: Colorless and color gamut

- Yield: 10-16 m2 / L

- Application tools: Brush and Roller

- Dilution: 5% 1st layer for unvarnished wood

- Cleaning of utensils and dilution: Water

Certifications

Reaction to Fire UNE EN 13501-1: B-s2, d0 / On MDF substrate B-s1, d0

VOC ISO 16000-6 emission: A +

Toy safety. Migration of certain elements UNE-EN 71-3

Community Ecolabel for interior and exterior paints and varnishes (Ecolabel)

How to use

General recommendations

Stir well in the container. Surfaces must be smooth (sanded), degreased, clean and dry. Apply in thin coats and sand lightly between coats. The moisture content of the wood should not exceed 12% in hard wood and 15% in softwood. 2 Do not varnish in full sun or with dew.

Unprepared surfaces

Sand the wood in the grain direction, thoroughly clean, remove resins or resin secretions and kill sharp edges. Old unvarnished wood: it is essential to completely remove the dry and gray surface by sanding or brushing thoroughly until the wood in good condition is exposed.

Indoors: apply 2 or 3 coats.

Outdoors: For a better protection of the wood outdoors, apply Titanxyl Total Protection Ultra or Titanxyl Lasur Bottom Ultra, finishing with 2 or 3 layers of Ecological Water Varnish.

For restoration of interior wood with woodworm problems, apply a layer of Titanxyl Water-repellent, with mold problems, apply a layer of Titanxyl Total Protection Ultra or Titanxyl Lasur Ultra Fund.

Resinous and tropical woods: can prevent drying. Thoroughly degrease with TITAN Yate Thinner to remove resin. Apply a first coat on a reduced surface and observe. If the resin exudation persists, consult the Technical Service, but finish with 2 - 3 layers of Ecological Water Varnish.

The tonality, intensity of the final color depend on the type, color and thickness of the wood as well as the number of layers. If the desired color has been achieved with the 1st coat, finish with colorless.

Maintenance of already painted surfaces in good condition

Lightly sand, remove the generated dust and apply 1 or 2 coats depending on the state of the surface. When old varnishes are catalyzed or polyurethane, it is essential to sand the entire surface thoroughly, to remove them completely.

Maintenance of already painted surfaces in poor condition

Remove completely and proceed as on unprepared surfaces.

7 Items

Titan
22201
8414800421934
Data sheet
Kind of product:
Finishing paint or final coat
Degree of Brightness
Satin
Theoretical yield per hand (m2 / L):
12
Number of recommended hands:
two
Sanding between layers
It is not necessary
Dry to Touch at 23ºC and 60% RH
15-30 min
Time for repainting at 23ºC and 60% RH
2 - 4 h
Diluent / Cleaning:
Water
Number of Components
1 component
Type Application:
With brush or roller
Place of application
Interior and Exterior
Paint Wood
Directly
Paint Already Painted Surfaces
A smooth sanding and painting directly
Danger for transport:
Innocuous, without restrictions
Your Question has been successfully sent our team. Thanks for question!
Do not leave with doubt! Its time to ask!
hide form
Captcha

You might also like