Ecological Outdoor Water-based Glossy Varnish Titanlux

Ecological Outdoor Water-based Glossy Varnish Titanlux

Ecological Outdoor Water-based Glossy Varnish Titanlux

€9.30VAT included
In stock

Glossy water-based varnish with high resistance to weathering without loss of shine. Hard and flexible. Contains ultraviolet filters. With anti-mold preservative.

Description

Glossy water-based varnish with high resistance to weathering without loss of shine. Hard and flexible. Contains ultraviolet filters. With anti-mold preservative.

Fields of application

Special to protect and decorate wood outdoors in extreme conditions or harsh environments, both urban and rural and high mountain.

Technical characteristics

- Nature: Acrylic

- Color: Colorless

- Yield: 10-16 m2 / L

- Drying at 23ºC 60% RH (UNE 48301): 30 - 60 minutes / dry touch: 15 - 30 minutes

- Repainted at 23ºC 60% RH (UNE 48283) 4 - 6 hours

- Application tools: Brush, roller and spray gun

- Dilution: Brush: 5% (1st layer of unvarnished wood) / Roller 5 -10% / Gun: 15 - 20%

- Cleaning of utensils and dilution: Water

Certifications

Community Ecolabel for interior and exterior paints and varnishes (Ecolabel)

How to use

General recommendations

Stir well in the container. Surfaces must be smooth (sanded), degreased, clean and dry. 2 Apply in thin coats and sand lightly between coats. The moisture content of the wood should not exceed 12% in hard wood and 15% in softwood. Do not varnish in full sun or with dew.

Unprepared surfaces

Sand the wood in the grain direction, thoroughly clean, remove resins or resin secretions and kill sharp edges. Old unvarnished wood: it is essential to completely remove the dry and gray surface by sanding or brushing thoroughly until the wood in good condition is exposed.

For a better protection of the wood to the outside, apply Titanxyl Total Protection Ultra or Titanxyl Lasur Ultra Fund, finishing with 2 or 3 layers of Ecological Water Varnish.

Resinous and tropical woods: can prevent drying. Thoroughly degrease with TITAN Yate Thinner to remove resin. Apply a first coat on a reduced surface and observe. If the resin exudation persists, consult the Technical Service, but finish with 2 - 3 layers of Ecological Water Varnish.

The tonality, intensity of the final color depend on the type, color and thickness of the wood as well as the number of layers. If the desired color has been achieved with the 1st coat, finish with colorless.

Maintenance of already painted surfaces in good condition

Lightly sand, remove the generated dust and apply 1 or 2 coats depending on the state of the surface. When old varnishes are catalyzed or polyurethane, it is essential to sand the entire surface thoroughly, to remove them completely.

Maintenance of already painted surfaces in poor condition

Remove completely and proceed as on unprepared surfaces.

5 Items

Titan
22209
8414800422313
Data sheet
Kind of product:
Finishing paint or final coat
Degree of Brightness
Brightness
Theoretical yield per hand (m2 / L):
12
Number of recommended hands:
two
Sanding between layers
It is not necessary
Dry to Touch at 23ºC and 60% RH
15-30 min
Time for repainting at 23ºC and 60% RH
2 - 4 h
Diluent / Cleaning:
Water
Number of Components
1 component
Type Application:
By brush, roller or gun
Place of application
Only Exterior
Paint Wood
Fungicide and Insecticide Fund
Paint Already Painted Surfaces
A smooth sanding and painting directly
Danger for transport:
Innocuous, without restrictions
Your Question has been successfully sent our team. Thanks for question!
Do not leave with doubt! Its time to ask!
hide form
Captcha

You might also like