Polyester putty 2-component filler designed to repair vehicles. Product with very good adhesion to different surfaces, such as steel and aluminum, galvanized steel, sanded glass panels and polyester, polyester putty, acrylic and epoxy gear, existing layers in good condition. Yellow color. Mate.
Polyester putty two components, with excellent adhesion to plastic bumpers or other plastic parts, except for polyethylene. It is extremely easy to sand with a grain of paper P120-240 and a perfect finish without pores is obtained. Does not clog sandpaper. Excellent mechanical strength due to its high elasticity.
Acrylic caulk (riller primer) premium spray quickly and professionally to close small irregularities, scratches and sanding marks on the piece for repair. A very smooth surface for painting subsequently obtained. This acrylic caulk thus becomes an ideal link between the component polyester putty and painted later.
universal filler (putty) polyester two components suitable for use in all metals (aluminum, stainless steel, galvanized steel, bare steel). It is also suitable for wood and polyester surfaces. It dries quickly (20-30 minutes) and can be easily sanded.
Lightweight filling bicomponent polyester reinforced with fiberglass to save and fill cavities. It is also recommended to fill corroded surfaces. Easy to apply, dries quickly and sands easily with paper with a grain of P80-120. The result is a highly resistant and elastic surface.
Polyester putty two components, with aluminum added to provide increased thickness and resistance to vibration. Suitable for metal and wood surfaces. It dries quickly, within 20-30 minutes. It is easy to sand with a grain of paper P80-120 for a perfect finish with no pores.
Thin filling a component, ideal for finishing of small uneven surfaces. Apply 2 or 3 coats, allowing 30 minutes between each to dry thoroughly and then use a fine sandpaper of P600-P1000. It may be coated with any primer or paint.
Filling mastic two component provides excellent adhesion to galvanized surfaces, steel, aluminum, light alloys and fiberglass. Easy to spread, it is suitable for dry sanding and is a good product base to carry out any work. Recommended for repairs, fillings, retouches on any surface, in body and industry.
Bicomponent polyester putty, glass fiber reinforced, which gives the product high mechanical properties and surface hardness. This allows the reconstruction of missing or severely damaged small automobile parts and the filling of holes, through which the fiber structure is formed on the holes. It has high adhesion.
Puttytwo-component polyester to spray. It is applied with a spray gun nozzle of 2.50 - 3.00 mm. Due to its high thixotropic consistency, the hardener must be thoroughly removed. It is easy to sand (dry) to obtain a uniform finish without pores. It dries in 2-3 h at 23 ° C (73 ° F).
ULTIMATE GENERATION two-component Low Density Polyester putty that stands out for its easy application, fineness, absence of pores, high performance, filling power and above all, for its ease of sanding. Adhesion on steel, galvanized and electrozincado and previously sanded aluminum.
Polyester Putty intended for the filling of dents and other body irregularities. It stands out for its adhesion, filling power and flexibility. Usable in the painting of the automobile and industrial vehicle. Adhesion on galvanized steel and electrozinc.
URKI-2000 is a high quality polyester putty designed for use in body shops for the collection of faults and filling of dents. It stands out for its extraordinary ease of application, fineness, sanding, absence of pores and flexibility. Used on Steel, Casting, Polyester reinforced with fiberglass, Wood.
The URKI-FIB Putty, based on Fiberglass, is intended for the filling of dents, cracks, perforations or splinters in steel, cast iron or laminated Polyester-Fiberglass (GRP). Usable in the repair of car bodies and industrial vehicles, railway equipment, machinery, boats, etc. Also in the construction of models and prototypes where an easily moldable material with easy sanding is required. It stands out for its resistance, filling power, ease of application and sanding.
The BESA-ROC is a Polyester Filler applied to a gun. Usable as a high-thickness filler backing for automotive repairs; Industrial Vehicle, Machine Tool, Isotherms, etc. "EXCLUSIVE USE IN INDUSTRIAL FACILITIES"