Bio-sustainable paint bucket 4L Titanlux
Washable water paint for interior walls and ceilings, formulated with sustainability criteria. Unchanging white, does not drip or splash. It does not contain volatile organic compounds, nor biocidal agents, so it is indicated for users who may have developed an allergic sensitivity to these compounds.
Cradle to Cradle Certified: GOLD.
You might also like
Related Products ( 16 other products in the same category )
Description
Washable water paint for interior walls and ceilings, formulated with sustainability criteria. Unchanging white, does not drip or splash. It does not contain volatile organic compounds, nor biocidal agents, so it is indicated for users who may have developed an allergic sensitivity to these compounds.
Cradle to Cradle Certified: GOLD.
Technical data
- Styrene Acrylic Nature (Biomass balance)
- Matte finish
- Color (UNE EN ISO 11664-4) White and colors
- Density (UNE EN ISO 2811-1) 1.40 - 1.44 Kg / l
- Yield (UNE 48282) 8 - 10 m2 / l
- Drying at 23oC 60% RH (UNE 48301) 30 - 60 minutes
- Repainting at 23oC 60% RH (UNE 48283) 6 - 8 hours
- Application Methods Brush, roller and airless
- Thinner Water
- Application Conditions, RH <80% +10 oC - +30 oC
- Solid Volume (UNE EN ISO 3233-3) 37 - 38%
- VOC (UNE EN ISO 11890-2) 2004/42 / IIA (a) (75/30) Max. VOC <1 g / l
- Presentation 4l
Variations in temperature, humidity, thickness, tinting or depending on the type of substrate, etc., can cause changes in drying, performance or other properties.
Certifications
Wet rub resistance UNE EN ISO 11998: Class 2 washability
Cradle to Cradle Certified: GOLD (LEED Credits)
https://www.c2ccertified.org/products/scorecard/p80-titan-natural-industrias-titan-s.a.u
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. Surfaces to be painted must be clean, dry and consistent.
VERY IMPORTANT ATTENTION. DO NOT APPLY:
At temperatures below 7o C. With relative humidity greater than or equal to 80%. With rain forecast in the next hours. If these instructions are not followed, the result of the application may not be satisfactory, stains of 1 different color may appear, tears (snail slime, etc.). Industrias TITAN, S. A. U. will not accept any claim that has not taken into account these instructions. Pay special attention to those dark colors, as some of them are more susceptible to the aforementioned phenomena, which is all the more reason to observe the indicated indications and precautions.
VERY IMPORTANT ATTENTION. DO NOT APPLY:
At temperatures below 7o C. With relative humidity greater than or equal to 80%. With rain forecast in the next hours. If these instructions are not followed, the result of the application may not be satisfactory, stains of different colors, tearing (snail slime, etc.) may appear. Industrias TITAN, S. A. U. will not accept any claim that has not taken into account these instructions. This may be more pronounced in some dark colors. UN PREPARED SURFACES: On surfaces in good condition: apply a first coat diluted with 10 - 15% water, applying a second undiluted layer. On surfaces in poor condition, to consolidate substrate and homogenize porosity or on tempera, glue, lime or surfaces where they have been removed: clean up all affected areas, removing all material that is not well adhered and Consistent, cleaning all the dirt and dust that it might have and applying a first layer diluted with 5% water, applying a second undiluted layer.
MAINTENANCE OF SURFACES ALREADY PAINTED IN GOOD CONDITION:
Apply the paint directly after washing or brushing. You can dilute the first layer with 5% water, then apply the second as is.
MAINTENANCE SURFACES ALREADY PAINTED IN POOR CONDITION:
Completely remove old paints and proceed as on unprepared surfaces.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 9
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 20-40 min
- Time for repainting at 23ºC and 60% RH
- 6-8 h
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Pladur
- Primer Sealer or Fixer
- Paint Plaster or Putty
- Primer Sealer or Fixer
- Paint Concrete or Cement
- Fixing Primer
- Paint Already Painted Surfaces
- Directly without sanding
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800424980
No customer questions for the moment.