Vinyl Antifouling Titan Yacht 4 L
Patent semi-hard and with a strong adhesive matrix antifouling power. It keeps the helmet more time scale and helps the boat to reach full speed.
You might also like
Related Products ( 1 other product in the same category )
Description
Patent semi-hard and with a strong adhesive matrix antifouling power. It keeps the helmet more time scale and helps the boat to reach full speed.
Fields of application
As fouling on submerged surfaces (hull).
Technical characteristics
- Color: White, and palette
- Matte finish
- Yield: 10-14 m2 / l (50-70 μ dry)
- Film thickness: 60-70 μ dry film (applied in 2 layers)
- Drying at 23 ° C 60% RH: 20 to 25 minutes. Immersion (launch) within 12 hours and up to 6 months.
- Repainting 60% RH at 23 ° C: 8 - 12 hours
- Tools: brush and roller
- Thinner: Universal Solvent
- Cleaning of tools: Universal Solvent
Calculation of paint needed
The calculation of the required paint can be performed according to the following table in response to the meters in length and type of boat:
1. Select the column as the meters approximate length of emparcación.
2. Depending on the type of boat, check how many liters of paint are needed gray box.
3. Under the gray box marks you need few pots of 750 ml and 2.5 L.
For example, if I have a sailboat of 10 meters in length, 5.5 L I'll need about 2 cans of 2.5 liters and 1 bottle of 750 ml. If the containers are of 4 L, I need April 1 and 2 of 750 L to 2 mL 4L absence 750 ml size.
How to use
General recommendations:Remove the packaging before use. The surface must be sanded, clean, dry and free of salt (washed). Do not paint in direct sunlight, nor with dew. In high wear areas such as the waterline, keel, rudder, etc., an additional layer is recommended because water turbulence exertsa faster self-polishing.
Unprepared surfaces:
-Polyester: degrease with Universal Thinner and apply 2 coats of primer Epoxy Corrosion TITAN Yacht at 24 hour intervals. Preventive osmosis system applied Epoxy Primer M 150 TITAN Yate.
-Metal surfaces apply 1 coat of epoxy primer TITAN Yate. After 24 hours, apply 3-4 coats of primer Epoxy Yacht TITAN M150 rigorously following the package instructions.
-Wood surfaces:apply 2 coats of primer Epoxy Corrosion TITAN Yacht, 1st coat diluted with 20% of Universal Thinner.
Maintenance painted surfaces in good condition:Rinse with fresh water jet and directly apply 2 coats of clear. If the old paints are not vinyl, they must be completely removed with stripper Patent Water TITAN, followed by a wash with fresh water and proceed as unprepared surfaces.
Maintenance painted surfaces in poor condition:Remove completely with Water Stripper Patent TITAN yacht, followed by a wash with fresh water and proceed as in unpainted surface.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Type of Atifouling
- Hard Matrix
- Ideal for boats
- Outboards
- Maximum Speed Navigation
- Unlimited
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 25 minutes
- Time for repainting at 23ºC and 60% RH
- 8-12 noon
- Launching time
- After 12 h and before 6 months
- Antifouling effect duration
- 1 year
- Number of Components
- 1 component
- Type Application:
- With brush or roller
- Paint Iron or Steel
- Epoxy primer
- Paint Aluminum, Brass or Copper
- Epoxy primer
- Paint Wood
- Epoxy primer
- Paint Fiber Polyester
- Epoxy primer
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8414800070583
No customer questions for the moment.