Selfpolishing Antifouling Lixiviant 4 L Titan
Patent for submerged surfaces (hull), polyester, wood, steel, etc., previously primed. Especially suitable for boats that usually do winterizing above water. Biological activity estimated 6 months.
You might also like
Related Products ( 2 other products in the same category )
Description
Patent selfpolishing antifouling biologically active throughout the duration of the same (about 6 months). It can be applied directly onto most patents in good condition.
Fields of application
Patent for submerged surfaces (hull), polyester, wood, steel, etc., previously primed. Especially suitable for boats that usually do winterizing above water. Biological activity estimated 6 months.
Technical characteristics
- Color: White and palette
- Matte finish
- Yield: 6-8 m2 / l
- Film thickness: 70-80 μ dry in 2 layers.
- Drying at 23 ° C 60% RH: 1 hour. Immersion (launch) within 12 hours to 6 months.
- Repainting 60% RH at 23 ° C: 6 - 8 hours
- Tools: brush and roller
- Thinner: Universal Solvent
- Cleaning of tools: Universal Solvent
Calculation of paint needed
Calculating paint necesaria can be performed according to the following table in response to the meters in length and type of boat:
1. Select the column as the meters approximate length of emparcación.
2. Depending on the type of boat, check how many liters of paint are needed gray box.
3. Under the gray box marks you need few pots of 750 ml and 2.5 L.
For example, if I have a sailboat of 10 meters in length, 5.5 L I'll need about 2 cans of 2.5 liters and 1 bottle of 750 ml. If the containers are of 4 L, I need April 1 and 2 of 750 L to 2 mL 4L absence 750 ml size.
How to use
General recommendations:Remove the packaging before use. The surface must be sanded, clean, dry and free of salt (washed). Do not paint in direct sunlight, nor with dew. In high wear areas such aswaterline, keel, rudder, etc., an additional layer is recommended because water turbulence has a faster self-polishing.
Unprepared surfaces:Properly prepared with primer and anticorrosive epoxy primer Epoxy Yacht TITAN Thick TITAN M150 Yate. Pat selfpolishing end Lixiviant between 12-24 hours after the last coat of primer.
Maintenance painted surfaces in good condition:Patents on most old in good condition, wash with fresh water jet and directly apply selfpolishing Patent Lixiviant. Do not apply to patents hard matrix, and if knowing the type of patent, sealed with primer before applying AluminioTITAN Yate patent.
Maintenance painted surfaces in poor condition:Remove completely with Water Stripper Patent TITAN yacht, followed by a wash with fresh water and proceed as in unpainted surface.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Type of Atifouling
- Self-polishing at high speed
- Ideal for boats
- Sailboats
- Maximum Speed Navigation
- 20 knots
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 6
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 1 hour
- Time for repainting at 23ºC and 60% RH
- 6 a.m.
- Launching time
- After 12 h and before 6 months
- Antifouling effect duration
- 6 months
- Diluent / Cleaning:
- Universal Solvent
- Number of Components
- 1 component
- Type Application:
- With brush or roller
- Place of application
- Only Exterior
- Paint Iron or Steel
- Epoxy primer
- Paint Aluminum, Brass or Copper
- Epoxy primer
- Paint Wood
- Epoxy primer
- Paint Fiber Polyester
- Epoxy primer
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8414800320411
No customer questions for the moment.