Xylazelfloor varnishvarnish is a bright and satin highly resistant to abrasion and chemicals aqueous dispersion finishes. For all types of wood indoors where the requirements for resistance to abrasion and impact are very high: wood and cork flooring, doors, window frames, handrails, baseboards, furniture, stairs etc.
Soils in satin varnish water Xylazel
22,05€VAT included
Xylazelfloor varnishvarnish is a bright and satin highly resistant to abrasion and chemicals aqueous dispersion finishes. For all types of wood indoors where the requirements for resistance to abrasion and impact are very high: wood and cork flooring, doors, window frames, handrails, baseboards, furniture, stairs etc.
You might also like
Related Products ( 14 other products in the same category )
-40%
Product Description
Xylazelfloor varnishIt is a varnish gloss and satin finishes aqueous dispersion of a urethane-acrylic copolymer component is highly resistant to abrasion and chemicals.
Features soil water varnish
• High gloss and high transparency.
• High hardness and resistance to abrasion and impact.
• fast drying (1 hour).
• Protect the wood against stains, dust, alchohol, detergents, oils and aggressive household chemicals Other effects.
• Easy to apply with a brush, roller or spray.
• Weak odor, no annoying solvents.
• Easy care and maintenance.
Fields of application
HeFloor varnishXylazel is useful for all types of wood indoors where the requirements for resistance to abrasion and impact are very high: wood and cork flooring, doors, window frames, handrails, baseboards, furniture, stairs etc.
How to use
-On new wood:New wood surfaces to be varnished must be dry and clean. For a better finish, it should be sanded before applying varnish Xylazel floors. The product is applied undiluted (can be diluted by 20% firsthand if we want greater penetration). After about 3 hours. you can apply the second coat. Between coats, sand the surface should be clean and dust.
-About old varnish:Before applying the varnish, the surface must be sanded. sanding should be vigorous, to remove dirt, grease, wax and get a sticky surface. Although adherence to well get with most varnishes is good, old unknown varnishes is desirable before applying conduct a test of compatibility.
Technical characteristics
-Performance:Between 10 and 15 m2 / L per coat, depending on the thickness of layer you want to give.
- Application: Span>The water-based varnish for wood can ser applied to brush or gun and short nap roller.
- Cleaning of tools: Span>Water and soap.
10070
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Satin
- Theoretical yield per hand (m2 / L):
- 10
- Number of recommended hands:
- two
- Dry to Touch at 23ºC and 60% RH
- 1 h, stepping from 8 h
- Time for repainting at 23ºC and 60% RH
- 3 hours
- Time for maximum hardness
- 3 days
- Diluent / Cleaning:
- Water
- Number of Components
- 1 component
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414956705322
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form