Autoglym BLACK DYE is an effective black dye for multiple surfaces such as plastics, rubber, carpet, bumpers, etc. High opacity, an application gets good coverage and excellent results. Valid to restore damaged bumpers or whitish, plastics lose color, rubber exterior, stained carpets, etc.
Two-component acrylic varnish. Gloss finish, highly durable, non-yellowing and high quality. Meant for the manufacture of bodies such as the repair of these. It may be dried in an oven at room temperature. Increasing use is being applied for important mechanical and chemical resistance. Complies with European standards of emissions.
Finishing nitro-1-component combination. Smooth finish. Suitable for finishing parts of the body where an embellishment color and fast drying aluminum wheels as needed. Special attention to the direct painted on plastic, which may need some bonding bridge, as our PLASTIC PRIMER, to ensure proper adhesion.
1-component acrylic finish for coating additive conveniently bumper cars in the most common plastics market. It contains microspheres providing a textured appearance of a low-medium grain. Product for small jobs which, by their presentation in aerosol requires no preparation or cleaning of tools, resulting economically advantageous.
UHS express surfacer that has been formulated with totally innovative resins and indicated in partial quick repairs. It stands out for its covering and excellent sanding thanks to its hardening speed, and the vehicle can be sanded at 20-25 min. From the application without the need for energy expenditure of heat in the cabin or IR systems, which can generate significant savings in the painting cycle, as well as an increase in productivity.
Acrylic equipment used in repair processes for Industrial Vehicles, equipment and machinery in general. Applicable on primers, polyester putties or directly on sanded sheet. It presents great power of filling, equalization and speed of drying; easy to sand, which added to its excellent recoatability allows very short work times. "EXCLUSIVE USE IN INDUSTRIAL FACILITIES"
BESA-GLASS UHS Ultra High-Solids Varnish, for Bi-Coat Systems; It stands out for its very high non-volatile content at application viscosity, achieving more body, shine and enhanced metallic effect than with conventional products, complying with environmental legislation. Very good UV resistance. It is aimed at repainting the car in Bi-Layer Systems.
Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC It is suitable for the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates.
Spray enamel developed for the painting of automobile tires, as well as for industrial use as a metallic enamel in a single layer. It stands out for its simple application, quick drying, hiding power, resistance to friction and to the car wash. The VOC content is 746 g / l (2004/42 / CE) IIB (E) (840).
Spray paint specially formulated for the touch-up of vehicle bumpers. Presents a finish that resembles those of origin. Its use as an anchor primer for plastics with excellent adhesion is feasible. To achieve different textures, the nozzles can be exchanged, as well as to distance the paint distance more or less. The VOC content is <840 g / l (2004/42 / CE) IIB (E) (840)
Adhesion promoter for a wide variety of plastic parts in the automotive sector. garden furniture or other hard plastic objects. Applicable on the following types: PP, PUR, PS, PA, PP-EPDM, ABS, PVC, GRP, PC. It is suitable in the application of patches and / or small surfaces. It is very easy to apply and allows high adhesion power on the indicated substrates. The VOC content is 754 g / l (2004/42 / CE) IIB (E) (840).
Acrylic varnish of 2 components to perform partial repairs with Bi-layer Systems. It stands out for its resistance to scratching, gasoline and good behavior to the exterior, as well as for its speed of drying and leveling. The finish that is achieved is the same as with conventional 2 c varnishes. of use with a gun. It has a deposit in the lower part that when activated mixes the two components to apply the varnish.
URKISEAL 4020 is a black primer that transforms into a hard and opaque film once dry. It facilitates the adhesion of the Polyurethane Sealants and is usable on different substrates: glass, aluminum, concrete, wood and plastic. It can also be used as a barrier between sealant and paint to avoid migration of plasticizers.
The tires again with a decorative gloss shine. A durable protective painted with high pigmentation for both steel wheels and lightweight metal. For the protection of metallic pigments and a high brightness we recommend additional seal lacquer painted bilayer.
Acrylic caulk (riller primer) premium spray quickly and professionally to close small irregularities, scratches and sanding marks on the piece for repair. A very smooth surface for painting subsequently obtained. This acrylic caulk thus becomes an ideal link between the component polyester putty and painted later.
Special paint for painting objects exposed to high temperatures. Available in various colors and varnish. Suitable for painting exhaust motorcycles and automobiles, but also of stovepipes, coatings barbecues and more. Applicable on metal, wrought iron, aluminum. Also suitable as paint to protect the engine.
Acrylic one-component quick-drying insulation. It can be applied on steel surfaces, bare sheet metal, zinc plated sheet, aluminum, etc. The surfaces to be painted must be dry and free of grease, rust and all kinds of impurities that prevent the good adhesion of the product. Light gray color
Renews and transforms your furniture with ourchalk spray paint effect "chalky finish". With a fine touch classic finish, matt and provides a renewed any type of wood or metal furniture both inside and outside appearance. You do not need prior sanding. In the following link you can see different finishes.