ULTIMATE GENERATION two-component Low Density Polyester putty that stands out for its easy application, fineness, absence of pores, high performance, filling power and above all, for its ease of sanding. Adhesion on steel, galvanized and electrozincado and previously sanded aluminum.
Special Polyester Putties
The BESA-ROC is a Polyester Filler applied to a gun. Usable as a high-thickness filler backing for automotive repairs; Industrial Vehicle, Machine Tool, Isotherms, etc. "EXCLUSIVE USE IN INDUSTRIAL FACILITIES"
Polyester putty two components, with excellent adhesion to plastic bumpers or other plastic parts, except for polyethylene. It is extremely easy to sand with a grain of paper P120-240 and a perfect finish without pores is obtained. Does not clog sandpaper. Excellent mechanical strength due to its high elasticity.
Polyester putty two components, with aluminum added to provide increased thickness and resistance to vibration. Suitable for metal and wood surfaces. It dries quickly, within 20-30 minutes. It is easy to sand with a grain of paper P80-120 for a perfect finish with no pores.
Thin filling a component, ideal for finishing of small uneven surfaces. Apply 2 or 3 coats, allowing 30 minutes between each to dry thoroughly and then use a fine sandpaper of P600-P1000. It may be coated with any primer or paint.
Puttytwo-component polyester to spray. It is applied with a spray gun nozzle of 2.50 - 3.00 mm. Due to its high thixotropic consistency, the hardener must be thoroughly removed. It is easy to sand (dry) to obtain a uniform finish without pores. It dries in 2-3 h at 23 ° C (73 ° F).