Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
Floor Prestige Renner 750 ML water-based floor paint
One-component, high-tech matt varnish for renovating floors. It is very resistant to footsteps and abrasion and also suitable for busy surfaces. Its formulation is water-based, odorless and with low VOC emissions, ideal for indoor environments. It can be washed, has very high coverage and a great adhesion on all carefully cleaned surfaces. In the case of already varnished surfaces, check whether a light sanding of the old film is necessary.
You might also like
Related Products ( 4 other products in the same category )
Description
One-component, high-tech matt varnish for renovating floors. It is very resistant to footsteps and abrasion and also suitable for busy surfaces. Its formulation is water-based, odorless and with low VOC emissions, ideal for indoor environments. It can be washed, has very high coverage and a great adhesion on all carefully cleaned surfaces. In the case of already varnished surfaces, check whether a light sanding of the old film is necessary.
No primer is applied. Ideal product for places subject to the HACCP standard. The product is certified and complies with the UNI 1 1021: 2002 standard.
Fields of use
Ceramic, stoneware, stone, cement, clay and wood floors.
Instructions for use
Clean the object of dust and grease that can damage the adhesion of the varnish. It is not applied on floors treated with oils, waxes or derivatives. Apply the product and wait for it to dry (drying between coats: minimum 2 hours) before applying the second coat. On surfaces to step on, it is recommended to apply 2 or 3 coats. Aerate the room after applying the product. On objects very subject to wear, it can be protected with a matte finish for parquet RP2260.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 14
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 3 - 4 h
- Diluent / Cleaning:
- Water
- Type Application:
- With brush or roller
- Place of application
- Interior Only
- Paint Ceramic Surfaces
- Directly
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8032993103163
No customer questions for the moment.