Glossy White Synthetic Enamel EX-330 TitanTech

Description

Industrial alkyd urethane enamel with very good color and gloss retention and excellent weather resistance. High gloss. Great elasticity and leveling. It resists well to mineral oils and aliphatic hydrocarbons. Excellent brush and roller application. For any iron or steel surface in low C2 or medium C3 corrosion environments, according to UNE EN ISO 12944. For structural steel, gates, doors, radiators, etc.

Certifications

Reaction to Fire UNE EN 13501-1: B-s1, d0 / on A1 substrate

Technical characteristics

• Urethanated alkyd nature
• Glossy Finish Gloss (UNE EN ISO 2813) 60º: 85 GU
• Color (UNE EN ISO 11664-4) Mopu Yellow, Carriage Green 0562, Black 0567 + White Base 0566 and Neutral Base 0597
• Density (UNE EN ISO 2811-1) 0.94 - 1.15 Kg / l
• Yield 10 - 12 m2 / l (35 - 45 µ dry)
• Drying at 23ºC 60% RH (UNE 48301) 4 hours
• Repainted at 23ºC 60% RH (UNE 48283) Minimum: 18 hours
• Application Methods Brush, roller, spray gun and airless Brush and Roller Dilution: 5% / Airbrush: 10% / Airless: - Airbrush Nozzle Diameter: 1.7 - 2.2 mm / Airless: 0.015 "- 0.018"
• Diluent Synthetic Solvent DX 830 or Multipurpose Solvent DX 840
• Cleaning of Solvent UtensilsSynthetic DX 830 or Multipurpose Solvent DX 840
• Recommended thickness (UNE EN ISO 2808) 40 - 80 µ dry
• Application Conditions, RH <80% +10 ºC - +30 ºC
• Dyeing System TITANCOLOR Industrial
• Color paste max volume White Base: 5% / Neutral Base: 12.5%
• Flash point (UNE EN ISO 3679) 39 ºC
• Solid Volume (UNE EN ISO 3233-3) 41 - 48%
• VOC (UNE EN ISO 11890-2) 460 g / l

* Variations in temperature, humidity, thickness, dyeing or depending on the type of support, etc., may cause changes in drying, performance or other properties

How to use

General recommendations:

Stir well in the container, preferably by mechanical process. Surfaces to be painted must be properly primed, clean, dry, and consistent. The yellowing process in alkyd is accelerated in dark rooms or those with a lack of natural light. Ultraviolets help to control the whiteness of the enamel, destroying the chromophore groups that are formed in the polymerization of alkyd enamel. Therefore, its use (white and base white color) is not recommended in closed rooms (cupboard interiors, ...) or rooms without natural light. The white color applied on radiators can yellow to a greater or lesser degree depending on the temperature reached.

Unprepared surfaces:

Steel: previously apply Anticorrosive Primer SR SX 110 or Anticorrosive Primer ZP SX 130 according to specifications, respecting the repainting intervals. Galvanized: previously apply SX 140 Phosphate Anticorrosive Primer or DTM SX 150 Acrylic Primer. Non-ferrous metals: previously apply SX 140 Phosphate Anticorrosive Primer. In all cases: apply the finishing coats according to the selected scheme (see recommended thickness). Other supports: Consult.

Maintenance of already painted surfaces in good condition:

In case of repainting on well adhered systems, cleaning of fats, oils and dirt (fresh water under pressure, solvent, etc.) and then letting it dry, apply one or two coats of Glossy Synthetic Enamel EX 330, as needed

Maintenance of already painted surfaces in poor condition:

In the case of poorly adhered systems, and / or with the presence of rust, remove by abrasive blasting to grade Sa2½ of the ISO 8501-1 standard or manual or mechanical cleaning to grade ST3 of the same standard. Then patch with SR SX 110 Anticorrosive Primer or ZP SX 130 Anticorrosive Primer preferablymbrush and then apply sufficient coats of EX330 Glossy Synthetic Enamel, according to requirements.

Precautions

Before using the product, carefully read the instructions on the package. For more information, consult the Safety Data Sheet. Store the containers tightly closed away from sources of heat and temperatures below zero. Shelf life: 36 months in unopened original container. Waste management: Follow local legal provisions. Help protect the environment, do not throw waste down the drain, put it in the nearest recycling center. Calculate the amount of product you will need to avoid waste and cost overruns. Keep the excess product well stored for a new use. Paint reuse can effectively minimize environmental effects on the life cycle of products.