TitanTech Forge Enamel DTM EX-390 TitanTech 4 L

VIDEOS

Forge Enamel DTM EX-390 TitanTech 4 L

71,35VAT included

Industrial anti-corrosive synthetic enamel with a forged appearance with excellent protection and decoration of steel surfaces, to which it gives a natural forged appearance. Long lasting with excellent anticorrosive properties. Great adherence, flexibility and weather resistance. It does not crack. Primer and finish for metal surfaces in low C2 to medium C3 corrosion environments. For railings, gates, streetlights, electric conduction pedestals in factories, etc.

Colour
Selected color: Rust Brown
Quantity Disponibilidad In stock

You might also like

Related Products ( 13 other products in the same category )

Description

Industrial anti-corrosive synthetic enamel with a forged appearance with excellent protection and decoration of steel surfaces, to which it gives a natural forged appearance. Long lasting with excellent anticorrosive properties. Great adherence, flexibility and weather resistance. It does not crack. Primer and finish for metal surfaces in low C2 to medium C3 corrosion environments. For railings, gates, lampposts, electric conduction pedestals in factories, etc.

Certifications

Reaction to Fire UNE EN 13501-1: 2007 + A1: 2010: B-s1, d0 / on A1 substrate

Technical characteristics

  • Urethanated alkyd nature
  • Matte Metallic Finish
  • Color (UNE EN ISO 11664-4) Steel gray 0202, Black 0204, Oxide brown 0214 + Colorless base 0597 Density (UNE EN ISO 2811-1) 1.55 - 1.59 Kg / l
  • Yield 8 - 12 m² / l (45 - 70 µ dry)
  • Drying at 23ºC 60% RH (UNE 48301) 4 - 6 hours
  • Repainted at 23ºC 60% RH (UNE 48283) Minimum 24 hours
  • Application Methods Brush and roller. Airbrush and airless
  • Brush and Roller Dilution: 0 - 5% / Airbrush: <10% / Airless: 5% (Indicative data)
  • Airbrush Nozzle Diameter: 2.5 - 4.0 mm widia / Airless steel: 0.018 "- 0.021" (Indicative data)
  • Airbrush Nozzle Pressure: 3 - 4bar / Airless: 175 - 200 bar
  • Diluent Synthetic Solvent DX 830 or Multipurpose Solvent DX 840
  • Cleaning of Utensils Synthetic Solvent DX 830 or Multipurpose Solvent DX 840
  • Recommended thickness (UNE EN ISO 2808) 100 - 160 µ dry
  • Application Conditions, RH <80% +10 ºC - +30 ºC
  • Dyeing System TITANCOLOR Industrial Max volume dye paste 3%
  • Flash point (UNE EN ISO 3679) 42ºC
  • Solid Volume (UNE EN ISO 3233-3) 56 - 58%
  • VOC (UNE EN ISO 11890-2) 400 g / l

* Variations in temperature, humidity, thickness, dyeing or depending on the type of support, etc., may cause changes in drying, performance or other properties

How to use

General recommendations:

Stir well in the container, preferably by mechanical process. Surfaces to be painted must be properly primed, clean, dry and consistent

Unprepared surfaces:

Steel: directly apply Forge Enamel DTM EX 390, respecting the repainting intervals. If the surface shows rust, sand gently to roughen the substrate, removing poorly adhered rust. The benefits of the scheme are directly related to the preparationof the support. In a C3 corrosion environment, the steel must be sanded to grade ST2 of the UNE EN ISO 8501-1 standard or abrasive blasting to Sa 2 1/2 of the same standard to obtain maximum performance. Galvanized: previously apply SX 140 Phosphate Anticorrosive Primer or DTM SX 150 Acrylic Primer. Non-ferrous metals: previously apply SX 140 Phosphate Anticorrosive Primer. In all cases: apply the finishing coats according to the selected scheme (see recommended thickness)

Maintenance of already painted surfaces in good condition:

In case of repainting on well adhered systems, cleaning of grease, oil and dirt (fresh water under pressure, solvent, etc.) and then letting it dry, apply one or two coats of Forge Enamel DTM EX 390, according to needs

Maintenance of already painted surfaces in poor condition:

In the case of poorly adhered systems, and / or with the presence of rust, remove by abrasive blasting to grade Sa2½ of the ISO 8501-1 standard or manual or mechanical cleaning to grade ST3 of the same standard. Apply directly enough coats of DTM EX 390 Forge Enamel, according to requirements

Precautions

Before using the product, read the instructions carefullyIt is from the container. For more information, consult the Safety Data Sheet. Store the containers tightly closed away from sources of heat and temperatures below zero. Shelf life: 36 months in unopened original container. Waste management: Follow local legal provisions. Help protect the environment, do not throw waste down the drain, put it in the nearest recycling center. Calculate the amount of product you will need to avoid waste and cost overruns. Keep the excess product well stored for a new use. Paint reuse can effectively minimize environmental effects on the life cycle of products

8414800428803

TitanTech https://pinturas-dami.com/img/m/479.jpg

22703
3 Items

Data sheet

Kind of product:
Finishing paint or final coat
Degree of Brightness
Brightness
Theoretical yield per hand (m2 / L):
10
Number of recommended hands:
two
Sanding between layers
It is not necessary
Dry to Touch at 23ºC and 60% RH
4 h
Time for repainting at 23ºC and 60% RH
12 h
Diluent / Cleaning:
Synthetic solvent
Number of Components
1 component
Type Application:
With brush or roller
Place of application
Interior and Exterior
Paint Iron or Steel
Synthetic, Antioxidant or Multipurpose Primer
Paint Aluminum, Brass or Copper
Multipurpose Primer
Paint Wood
Primer Sealer or Multipurpose
Paint Fiber Polyester
Primer Filler
Paint Galvanized Steel
Galvanized or Multipurpose Primer
Paint Already Painted Surfaces
A smooth sanding and painting directly
Danger for transport:
Prohibited Air Transportation

Specific References

ean13
8414800428803

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password