Titan Pro Extra matt white vinyl paint 15L P60 Titan Pro

VIDEOS

Extra matt white vinyl paint 15L P60 Titan Pro

86,65VAT included

High quality matte finish paint and resistance that respects health and the environment (ECOLABEL and A + Certification). High coverage, yield and whiteness. Perfect finish without marks or shine. Clean works, does not drip or splash. Indoor and outdoor. Washable. Contains anti-mold preservative. No odor, no dripping or splashing.

Quantity Disponibilidad In stock

You might also like

Related Products ( 16 other products in the same category )

Description

High quality matte finish paint and resistance that respects health and the environment (ECOLABEL and A + Certification). High coverage, yield and whiteness. Perfect finish without marks or shine. Clean works, does not drip or splash. Indoor and outdoor. Washable. Contains anti-mold preservative. No odor, no dripping or splashing.

Technical data

  • Vinyl Nature
  • Matte finish
  • Color (UNE EN ISO 11664-4) White
  • Density (UNE EN ISO 2811-1) 1.56 - 1.62 Kg / l
  • Yield 8 - 10 m² / l (44 - 55 µ dry)
  • Drying at 23ºC 60% RH (UNE 48301) 30 - 60 minutes
  • Repainted at 23ºC 60% RH (UNE 48283) 8 hours
  • Application Methods Brush, roller and airless. See note 1 in general recommendations
  • Viscosity (UNE 48076) 110 - 125 KU Airless dilution: 5%
  • Airless Nozzle Diameter: LP515
  • Airless Nozzle Pressure: 200 bar
  • Diluent Water
  • Recommended thickness (UNE EN ISO 2808) 88 - 110 µ dry in two layers
  • Application Conditions, RH <80% + 10ºC - +30 ºC
  • TITAN Universal Tint Dyeing, Professional Water Tint or TITANCOLOR System
  • Solid Volume (UNE EN ISO 3233-3) 43.5 - 44.5%
  • VOC (UNE EN ISO 11890-2) 2004/42 / IIA (a) (75/30) Max. VOC <10g / l

* Variations in temperature, humidity, thickness, dyeing or depending on the type of support, etc., may cause changes in drying, performance or other properties

Certifications

  • Determination of the covering power UNE EN ISO 6504/3: Class 2. 8.7 m² (98% covering power)
  • Reaction to Fire UNE EN 13501-1: B-s1, d0 on substrate A2-s1, d0
  • Permeability to liquid water UNE EN 1062-3: W1 (High)
  • Permeability to water vapor UNE EN ISO 7783: Class 1: Permeable
  • Resistance to wet rubbing UNE EN ISO 11998: Washability class 2
  • Emission VOC ISO 16000-6: A +
  • Resistance against fungi UNE EN 15457: Growth 0
  • Community Ecolabel for interior and exterior paints and varnishes (EU Ecolabel)

How to use

GENERAL RECOMMENDATIONS:

Stir well in the container by hand or with a low speed mixer. Surfaces to be painted must be clean, dry and consistent. Do not apply on hot surfaces or under strong wind. A good diagnosis and preparation of the support are essential to obtain the best results. Note 1: Airless application tested with Graco ST Max II 495 equipment: Unit equipped with 1/4 'hose, 15 meters, gun filter and 60 mesh lung.

VERY IMPORTANT ATTENTION. DO NOT APPLY:

At temperatures below 7º C. With relative humidity greater than or equal to 80%. With forecast of rain in the next hours. If these instructions are not respected, the result of the application may not be satisfactory, different colored spots may appear, tearing(snail slime, etc.). Industrias TITAN, SAU will not accept any claim that has not taken these instructions into account. This can be more pronounced in some dark colors.

UNPREPARED SURFACES:

On surfaces in good condition: apply a first coat diluted with 10-15% water, applying a second undiluted. On surfaces in poor condition: clean all affected areas, removing all material that is not well adhered and consistent, cleaning all dirt and dust that it may have. To consolidate substrate and homogenize porosity or on tempera, glue, lime paints or on surfaces where they have been removed, it is advisable to apply… Indoors: a first coat of S10 All Acrylic Fixed Primer 100% or S50 Sealer al Water, according to the indications of their respective Technical Sheets. Outdoors: a first coat of S10 All Acrylic Fixed Primer 100% or S20 Acrylic Super Penetrating Fixing Primer, according to the indications of their respective Technical Sheets.

MAINTENANCE OF ALREADY PAINTED SURFACES IN GOOD CONDITION:

Apply the paint directly after washing or brushing, diluting the first coat with 10-15% water, then applying the second coat as is.

MAINTENANCE OF ALREADY PAINTED SURFACES IN BAD CONDITION:

Completely remove old paints and proceed as on unprepared surfaces

Titan Pro https://pinturas-dami.com/img/m/69.jpg

21669
10 Items

Data sheet

Kind of product:
Finishing paint or final coat
Degree of Brightness
Mate
Theoretical yield per hand (m2 / L):
eleven
Dry to Touch at 23ºC and 60% RH
30 - 60 min
Time for repainting at 23ºC and 60% RH
8 - 12
Diluent / Cleaning:
Water
Type Application:
By brush, roller or gun
Place of application
Interior Only
Danger for transport:
Innocuous, without restrictions

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password