R80 Titan Pro Silicate Primer

Description

Mineral water-based primer for cement or concrete as a base for R-80 Silicate Coating. Great penetration power to guarantee a homogeneous absorption of the finishing paint. Great resistance to atmospheric agents. Serves as a thinner for R80 Silicate Coating.

Technical data

• Matte finish
• Color (UNE EN ISO 11664-4) Colorless
• Density (UNE EN ISO 2811-1) 1,03 - 1,06 Kg / l
• Yield 9 - 12 m² / l
• Drying at 23ºC 60% RH (UNE 48301) 30 - 60 minutes
• Repainted at 23ºC 60% RH (UNE 48283) 12 - 24 hours
• Application Methods Brush, roller and airless
• Diluent Water
• Cleaning of Utensils Water
• Application Conditions, RH <80% + 10ºC - +30 ºC.
• Do not apply with forecast of rain in the next few hours
• VOC (UNE EN ISO 11890-2) 2004/42 / IIA (C) (75/40) Max. VOC 40 g / l

* Variations in temperature, humidity, thickness, dyeing or depending on the type of support, etc., may cause changes in drying, performance or other properties.

How to use

GENERAL RECOMMENDATIONS:

Stir well in the container. The surfaces to be painted must be clean, dry, well set, consistent and free of paint residues. Apply 1 or 2 layers diluted maximum 50%, depending on the surface. On surfaces in poor condition, clean all affected areas, removing all material that is not well adheredand cleaning up all the dirt and dust they might have

VERY IMPORTANT ATTENTION. DO NOT APPLY:

At temperatures below 7º C. With relative humidity greater than or equal to 80%. With forecast of rain in the next hours. If these instructions are not respected, the result of the application may not be satisfactory, different colored spots, tearing (snail drool, etc.) may appear. Industrias TITAN, SAU will not accept any claim that has not taken these instructions into account. This can be more pronounced in some dark colors.

PRECAUTIONS

Before using the product, carefully read the instructions on the package. For more information, consult the Safety Data Sheet. Store the containers tightly closed away from sources of heat and temperatures below zero. Conservation: 6 months in unopened original container between 10 - 25 ºC. Waste management: Follow local legal provisions. Help protect the environment, do not throw waste down the drain, put it in the nearest recycling center. Calculate the amount of product you will need to avoid waste and cost overruns. Keep the excess product well stored for a new use. Before applying the product on a large surface where scaffolding must be used to rise to more than two floor levels, it is essential that a visit from a TITAN After Sales technician is requested to verify that the details of the this datasheet,that the condition of the surface is verified, and that recommendations are made in situ regarding environmental and atmospheric conditions to achieve a perfect finish with a guarantee. If these recommendations are not observed, Industrias TITAN SAU will not be responsible for the successful completion of the application.