Full Coverage Plastic Paint Colors 15L Titanlux
Washable interior / exterior paint that covers with a single coat. Decorate walls and ceilings with a quality and very resistant finish. Without smell. It does not drip or splash. With anti-mold preservative. Environmentally friendly.
(*) Colors not suitable for exterior: 1014 Honey Yellow / 1016 Lime Green / 1017 Apple Green
You might also like
Related Products ( 16 other products in the same category )
Description
Washable interior / exterior paint that covers with a single coat. Decorate walls and ceilings with a quality and very resistant finish. Without smell. It does not drip or splash. With anti-mold preservative. Environmentally friendly.
(*) Colors not suitable for exterior: 1014 Honey Yellow / 1016 Lime Green / 1017 Apple Green
Certifications
Reaction to Fire UNE EN 13501-1: 2007 + A1: 2009: B-s1, d0 on calcium silicate.
Resistance to wet rubbing UNE EN ISO 11998: CLASS 2
Determination of the covering power UNE EN ISO 6504/3: 8.7m2 / l (98% covering power)
Resistance against fungi UNE EN 15457: Growth 0
Technical characteristics
- Nature: Acrylic styrene
- Finish: Semi-matte
- Density (UNE EN ISO 2811-1): 1.36 - 1.40kg / l
- Coverage (UNE 48282): 10 m2 / l (approx. 1.5 l / m2) per coat
- Drying at 23ºC 60% RH (UNE 48301): 6 - 8 hours
- Repainted at 23ºC 60% RH (UNE 48283): 18-24 hours. Walkable: 2 - 3 days
- Application Methods: Brush and Roller
- Diluent: Water
- Recommended thickness (UNE EN ISO 2808): 1.0 - 1.2 mm dry film
- Solid Volume (UNE EN ISO 3233-3): 41.5 - 42%
- VOC (UNE EN ISO 11890-2): 2.004 / 42IIA (c) (75/40) Max. VOCs 5 g / l.
* Variations in temperature, humidity, thickness or depending on the type of support, etc., may cause changes in drying, performance, etc.
How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. Surfaces to be painted must be clean, dry and consistent.
UNPREPARED SURFACES: On surfaces in good condition: apply a first coat diluted with 10 - 15% water, applying a second undiluted. On surfaces in poor condition: clean all affected areas, removing all material that is not well adhered and consistent, cleaning all dirt and dust that they may have.
To consolidate substrate and homogenize porosity or on tempera, glue, lime paints or on surfaces where they have been removed: it is advisable to apply a first coat of TITAN Fixer or Sealer.
MAINTENANCE OF ALREADY PAINTED SURFACES IN GOOD CONDITION: Apply the paint directly after washing or brushing, diluting the first coat with 10-15% water, then applying the second coat as is.
MAINTENANCE OF ALREADY PAINTED SURFACESAS IN BAD CONDITION: Completely remove the old paints and proceed as on unprepared surfaces.
* If you want more information about this product, you can download its technical sheet in the "ATTACHMENTS" tab
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Semi-matt
- Theoretical yield per hand (m2 / L):
- 9
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 20-40 min
- Time for repainting at 23ºC and 60% RH
- 6-8 h
- Diluent / Cleaning:
- Water
- Type Application:
- With brush or roller
- Place of application
- Interior and Exterior
- Paint Pladur
- Primer Sealer or Fixer
- Paint Plaster or Putty
- Primer Sealer or Fixer
- Paint Concrete or Cement
- Fixing Primer
- Paint Already Painted Surfaces
- Directly without sanding
- Danger for transport:
- Innocuous, without restrictions
No customer questions for the moment.