Resin Varnish ideal for the protection and decoration of stamped concrete and similar surfaces. It enhances the shine of the same giving a satin appearance. It is a water-based, ecological, non-polluting, non-flammable product, with good resistance to the exterior, water repellent, resistant to stains and scratches. It does not make fur or flake. It is presented ready to use.
Impremor Water Resin Varnish
11,50€VAT included
Resin Varnish ideal for the protection and decoration of stamped concrete and similar surfaces. It enhances the shine of the same giving a satin appearance. It is a water-based, ecological, non-polluting, non-flammable product, with good resistance to the exterior, water repellent, resistant to stains and scratches. It does not make fur or flake. It is presented ready to use.
You might also like
Related Products ( 7 other products in the same category )
Description
Ideal product for the protection and decoration of stamped concrete and similar surfaces. It enhances the shine of the same giving a satin appearance. It is a water-based, ecological, non-polluting, non-flammable product, with good resistance to the exterior, water repellent, resistant to stains and scratches. It does not make fur or flake. It is presented ready to use.
Technical data
- Application By brush, roller, gun or spray (backpack)
- Drying 2-4 hours (it also depends on the ambient temperature 25 ºC 2 hours 15 ºC 4 hours approx)
- Satin Finish
- Yield 1 liter for 7-8 m²
- Cleaning of tools Water
Properties
- Special water-based resin varnish for stamped concrete and similar surfaces
- Can be tinted / colored with water-based or universal stain without problem
- Enhances shine giving a satin look
- Formulated to water Ecological non-polluting
- Non-flammable product
- Good resistance to exterior and interior
- Water repellent Resistant to stains, scratches, etc.
- Does not skin or flake Ready to use
- ZERO VOC, s
Ways of use
- Make sure that the surface to be applied is dry and clean of dirt
- If there are remains of other resins or varnishes, they will be cleaned, stripped or sanding, it must be taken into account that there should be no remains or scales for a perfect adherence.
- Apply a well distributed first coat
- Apply a second coat after 3-4 hours of drying, until it is well covered
20317
3 Items
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Satin
- Theoretical yield per hand (m2 / L):
- 7 - 8
- Dry to Touch at 23ºC and 60% RH
- 3 - 4 h
- Diluent / Cleaning:
- Water
- Type Application:
- With brush or roller
- Place of application
- Interior and Exterior
- Paint Concrete or Cement
- Directly
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8436005131326
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form