Titan Matte Paint One Coat ZodiaColors Special Edition
Washable matte monolayer authentic plastic paint for decorating interior walls and ceilings with very high coverage. It does not drip or splash. Covers with one hand . Special edition of 12 colors associated with each of the zodiac signs.
You might also like
Related Products ( 5 other products in the same category )
Description
Washable matte monolayer authentic plastic paint for decorating interior walls and ceilings with very high coverage. It does not drip or splash. Covers with one hand . Special edition of 12 colors associated with each of the zodiac signs.
Technical characteristics
- Nature Copolymer in emulsion
- Matte finish
- Density (UNE EN ISO 2811-1) 1.39 - 1.60 Kg / l
- Yield 9 - 11 m² / l
- Drying at 23ºC 60% RH (UNE 48301) 20 - 60 minutes
- Repainted at 23ºC 60% RH (UNE 48283) 6 - 8 h
- Application Methods Brush, roller and spray gun
- Diluent Water
- Application Conditions, RH <80% + 10ºC - +30 ºC
- Solid Volume (UNE EN ISO 3233-3) 40 - 47%
- VOC (UNE EN ISO 11890-2) 2004/42 / IIA (a) (75/30) Max. VOC 15g / l
* Variations in temperature, humidity, thickness, dyeing or depending on the type of support, etc., may cause changes in drying, performance or other properties.
Certifications
Resistance to Wet Rubbing UNE-EN-ISO 11998: Class 2
Emission VOC ISO 16000-6: A +
How to use
GENERAL RECOMMENDATIONS: Stir well in the container. Surfaces to be painted must be clean, dry and consistent.
UNPREPARED SURFACES:Apply a first coat diluted with 10 - 15% water, applying a second undiluted. On surfaces in poor condition: clean all affected areas, removing all material that is not well adhered and consistent, cleaning all dirt and dust that they may have. To consolidate substrate and homogenize porosity or on tempera, glue, lime paints or on surfaces where 2 have been removed: it is advisable to apply a first coat of TITAN Sealer or Hidrolin Fixer.
MAINTENANCE OF ALREADY PAINTED SURFACES IN GOOD CONDITION: Directly apply the paint without diluting after washing or brushing.
MAINTENANCE OF ALREADY PAINTED SURFACES IN POOR CONDITION: Clean all affected areas by removing old paints and other materials that are not well adhered. Clean all the dirt and dust that they might have. Once dry and consistent, proceed as on unprepared surfaces.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Mate
- Theoretical yield per hand (m2 / L):
- 9
- Number of recommended hands:
- one
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 20-60 min
- Time for repainting at 23ºC and 60% RH
- 6 a.m.
- Diluent / Cleaning:
- Water
- Type Application:
- By brush, roller or gun
- Place of application
- Interior Only
- Paint Wood
- Primer Sealer or Multipurpose
- Paint Pladur
- Primer Sealer or Fixer
- Paint Plaster or Putty
- Primer Sealer or Fixer
- Paint Concrete or Cement
- Fixing Primer
- Paint Already Painted Surfaces
- Directly without sanding
- Danger for transport:
- Innocuous, without restrictions
Specific References
- ean13
- 8414800439182
No customer questions for the moment.