List of products by brand HB BODY
Polyester putty two components, with excellent adhesion to plastic bumpers or other plastic parts, except for polyethylene. It is extremely easy to sand with a grain of paper P120-240 and a perfect finish without pores is obtained. Does not clog sandpaper. Excellent mechanical strength due to its high elasticity.
The CLEANER & POLISH spray has been specially designed to clean the surfaces of grease, insects and to protect against the accumulation of dirt. You can polish the chrome, aluminum and varnished surfaces. It protects against UV rays and lends the surface a lasting shine. It is waterproof and has silicone.
Anticorrosive high quality background perfect adhesion on new panels OEM (E-COAT). The good absorption of spray guarantees excellent results. It is ideal for metallic surfaces for its anticorrosive product. Painted over with any product of 2 components. Dries in 10 minutes.
Sound insulation and rubber-based sealant. Suitable for use in internal and external parts of the bottom of the car, with high stability during aging. Provides protection against scratches and stone chipping (chip protection) it is elastic and can be painted wet on wet with synthetic paints or with a single layer of color.
It rubber-based compound, is both sound and sealant. Suitable for use in interior or exterior parts of the underbody, with a high resistance to aging. Ready to use, it is applied with a special spray gun. permanently elastic, fast drying, very good adhesion, can be painted over with synthetic paint on wet.
The clear coat HS 499 is a fully transparent and high brightness of our system Acryl 2K layer. Thanks to its high density, excellent matched and high gloss this product is suitable for all end quality finishes, full and partial (specific points of the plate). Highly resistant to scratching.
HB BODY PRO P334 is an acrylic primer filler / sealer quality for full and partial vehicle finishes. Suitable for original or old and ideal for original manufacturer unsanded panels (electrodeposition coating) paint. It can be applied as a primer or filler wet on wet with the catalyst 720.
universal filler (putty) polyester two components suitable for use in all metals (aluminum, stainless steel, galvanized steel, bare steel). It is also suitable for wood and polyester surfaces. It dries quickly (20-30 minutes) and can be easily sanded.
Lightweight filling bicomponent polyester reinforced with fiberglass to save and fill cavities. It is also recommended to fill corroded surfaces. Easy to apply, dries quickly and sands easily with paper with a grain of P80-120. The result is a highly resistant and elastic surface.
Polyester putty two components, with aluminum added to provide increased thickness and resistance to vibration. Suitable for metal and wood surfaces. It dries quickly, within 20-30 minutes. It is easy to sand with a grain of paper P80-120 for a perfect finish with no pores.
Special Agent developed to reduce the brightness of paints 1K or 2K. It is added by 20-50% depending on the type of finish required. After adding the delustering agent, less thinner (reducer) is required.
Thin filling a component, ideal for finishing of small uneven surfaces. Apply 2 or 3 coats, allowing 30 minutes between each to dry thoroughly and then use a fine sandpaper of P600-P1000. It may be coated with any primer or paint.
Special degreaser to eliminate any contamination of the surfaces before painting them in spray format. Remove any type of silicones from the surface before painting. Especially for use in Automotive and Industry.
Semi-gloss colorless lacquer with excellent leveling and extremely fast drying, suitable for workshops with large workloads. Fast hardening 2K product suitable for all high quality finishes. It guarantees excellent resistance to extreme weather conditions.
Puttytwo-component polyester to spray. It is applied with a spray gun nozzle of 2.50 - 3.00 mm. Due to its high thixotropic consistency, the hardener must be thoroughly removed. It is easy to sand (dry) to obtain a uniform finish without pores. It dries in 2-3 h at 23 ° C (73 ° F).
Special adhesion-activating primer spray indicated for application on all plastic parts of the body, except polyethylene (PE). Suitable for plastic bumpers, spoilers and other surfaces. It dries in 10 minutes and can be painted on with all paint systems.
2k polyurethane protective coating that offers high mechanical resistance, scratches, solvent and UV protection. It has soundproofing and anti-slip capabilities. Application for multiple purposes, such as pick-up trucks, 4x4, SUV, off-road vehicles, trailers, motor boats, agricultural machines, floors, tools and many more. It can be applied on all metal surfaces, plastic parts, old 2K paint, OEM, wood and fiberglass.