Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search
Polyester Putty with CH1 Leyser Fiber 1 kg.
High quality polyester putty reinforced with fiberglass, intended for vehicle repairs. Recommended for filling large cracks and holes in vehicles, trailers and semi-trailers.
You might also like
Related Products ( 7 other products in the same category )
Description
High quality polyester putty reinforced with fiberglass, intended for vehicle repairs. Recommended for filling large cracks and holes in vehicles, trailers and semi-trailers.
Characteristics
- Product with very good adhesion to surfaces of different types, especially to metals.
- High hardness and good flexibility.
- Very short hardening time.
- Very good abrasive properties.
Applications
Polyester construction putty, especially recommended for filling large dents and holes in the body. It can be applied on:
- Steel and aluminum, after matting and degreasing.
- Zinc plated steel after matting and degreasing.
- Polyester laminates (GFK / GRP), polyester putties, acrylic and epoxy fillers.
- Existing layers in good condition.
Mixing ratio (by weight): Putty 100, hardener 2. Mix well until the paste is uniform in color. Stir carefully so as not to incorporate air.
Layer thickness: The putty can be applied in several thin layers. Before applying the next coat, the previous one must be hardened. Do not exceed the total thickness of 5 mm.
Pot life of the mixture: 4-5 minutes at 20ºC.
Drying time: 16-18 minutes at 20 ° C. The temperature below 20 ° C significantly reduces the hardening time of the product.
Sanding: Undercut sanding, P80-P120.
Data sheet
- Kind of product:
- Putty
- Degree of Brightness
- Mate
- Sanding between layers
- recess P80-P120
- Dry to Touch at 23ºC and 60% RH
- 16 min
- Time for repainting at 23ºC and 60% RH
- 16 min
- Number of Components
- 2 components
- Mix ratio
- 2 g of catalyst per 100 g of putty
- Life of the mixture at 23ºC and 60% RH
- 4 min
- Type Application:
- A Spatula
- Paint Iron or Steel
- Directly
- Paint Wood
- Directly
- Paint Fiber Polyester
- Directly
- Paint Galvanized Steel
- Directly
- Danger for transport:
- Prohibited Air Transportation
- advice
- Do not exceed the total thickness of 5 mm
No customer questions for the moment.