Equipment and Tools

Plastic measuring cup for two-component paints with lid and without lid. Scales 2: 1, 3: 1, 4: 1 and 5: 1 P>

Replacement roller specially indicated for enamelling and lacquering. To paint all types of small surfaces or difficult to access (radiators, plaster moldings, etc.) DOES NOT INCLUDE ROD.

RAL K7 Classic color chart 213 colors

NCS color chart Selection 980 colors. This letter is a very standardized color chart for degradation and is used by all manufacturers in the world to make any type of paint, whether in enamels, plastic paints, industrial paints, etc.

Preassembled "fly" 3M autofiltrante (FFA1P2), ready to use and designed for maximum simplicity and safety in use, with 2 charcoal filters of large surface that minimize breathing resistance. Mask type A satellite valve has low resistance that facilitates venting and prevents the accumulation of heat inside the mask.

The protective filter 3M 400 Series extends the life of the masks of series 4000 reducing filter saturation during spray applications.

Half mask 3M 7500 Series is designed for maximum comfort level for the user. Its patented exhalation valve facilitates breathing, increases the life of the mask and makes cleaning easier. Facepieces half mask 3M ™ 7500 Series are used in combination with two filters of gases, vapors or particles. It does not include filters, prefilters or retainers.

Filters 5911 3M particles protect against solid and liquid particles P1R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .

Filters 5925 3M particles protect against solid and liquid particles P2R are suitable for full-face masks Half masks 3M and 3M 6000 series and 7000 series requires a 3M Retainer filters 501. The filters are presented in blister packs of two units .

Filters 6055 3M vapors Class 2 protect against organic vapors with 65 point above boiling, they are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to EN 14387: 2004+ A1: 2008.

Filters 6059 3M vapors protect against organic vapors with 65 point above boiling, inorganic gases, acid gases and ammonia Class 1 are suitable for full-face masks Half masks 3M and 3M series 6000 and series 7000. According to standard EN 14387: 2004+ A1: 2008.

Prefilter retainer for use in particulate filters 5000 series and filters for gases and vapors of series 6000. P>

Support plate for sanding machines with a diameter of 150 mm and adhesion by velcro. The plate comes with the 15-hole system for optimum dust extraction. The plate comes with several adapters to be compatible with various systems on the market such as 3M Eléctrica, 3M Elite, Festo, Rupes and Indasa.

Paletina economic double universal use of pure bristle and wooden handle. P>

Paletina triple pure bristle and plastic handle for enameling, lacquering and prime in general with acrylic paints, enamels, varnishes, etc. Recommended for use on flat surfaces.

Paletina surfaces difficult to access, wooden handle, pure bristle and torsionally rigid shell pressed. P>

Rods minirodillos reusable "Clip System" to rollers 15 and 30 mm diameters and lengths of 5 to 15 cm. P>

Especially suitable for varnishing and lacquer surfaces any small or difficult to access. NOT INCLUDED ROD.

Plastic tray with 2 metal handles and plastic grid of 16 liters capacity.

Tri-platen mix of bristles and beech handle for enameling, lacquering and priming in general with acrylic paints, enamels, varnishes, etc. Recommended for use on flat surfaces.

Quadruple pallet mix of bristles and wooden handle for enameling, lacquering and priming in general with acrylic paints, enamels, varnishes, etc. Recommended for use on flat surfaces.

Roller replacement especially suitable for varnishing and lacquering all types of small or difficult to access surfaces. DOES NOT INCLUDE ROD.

Universal use paddle 100% fiber and wooden handle.

Sanding plate protective pad with Velcro on both sides. Diameter 150 mm, thickness of 3 mm and 67 holes to adapt to any type of plate