TitanTech Epoxy Primer Anticorrosive 2K gray spray 400ml

2K gray anticorrosive epoxy primer spray 400ml

15,50VAT included

Epoxy-polyamide anticorrosive primer for general use. Contains Zinc Phosphate. It has high anticorrosive properties, hardness, tenacity and adherence on various surfaces. For various metal structures in industrial and marine environments. Excellent adhesion on brass, aluminum and galvanized.

Quantity Disponibilidad In stock

You might also like

Related Products ( 1 other product in the same category )

Description

Epoxy-polyamide anticorrosive primer for general use, containing non-toxic corrosion-inhibiting pigments. Contains Zinc Phosphate. It has high anticorrosive properties, hardness, tenacity and adherence on various surfaces.

Fields of application

Two-component primer for various metal structures in industrial and marine environments. Excellent adhesion on brass, aluminum and galvanized.

Technical characteristics

- Beige

- Finish: Satin

- Yield: 6 - 10 m2/l (40 - 60 μ dry)

- Drying at 23ºC 60% HR: 3 - 4 hours

- Repainting at 23ºC 60% RH: Minimum: 8 hours, maximum: 7 days.

- Mixing Ratio: Base: 4, Hardener: 1

- Pot Life at 23ºC: 4 - 6 hours

- Application tools: Brush, roller or spray gun

- Diluent: Epoxy Solvent

- Utensil cleaning: Epoxy solvent

How to use

nderline;">General recommendations: Stir well in the container, preferably by mechanical process. The surfaces to be painted must be clean, dry and consistent. Let the mixture rest for 15 minutes before using it to favor the elimination of air. maximum repainting limit, to ensure adherence between coats, a soft blasting (Sand Sweeping) should be carried out, until giving a slight roughness to the primed surface.

Unprepared surfaces:

- Steel: deoxidize by abrasive blasting to the Sa 2½ grade of the ISO 8501-1 standard or manual or mechanical cleaning to the ST3 grade of the same standard. Degrease and remove dust and rust residue. Apply the necessary primer coats up to the recommended thickness. In environments with high corrosion, it is recommended to apply our Micaceous Iron Epoxy Primer 832 as an intermediate layer, prior to finishing with one of our polyurethanes. Finally, apply the finishing coats according to specifications.

- Galvanized Steel or non-ferrous metals: clean, degrease and apply 1 coat of primer. Depending on the quality of galvanizing, it will be necessary to open the pore.

- Other surfaces: consult.

Maintenance of already painted surfaces in poor condition: In the case of poorly adhered systems, and/or with the presence of rust, remove by abrasive blasting to the Sa 2½ grease of the ISO 8501-2 standard or manual or mechanical cleaning to the ST 3 grade of the same norm. Patch next with the corresponding primer, preferably by brush. Apply a general coat of the same primer and then apply the finish according to specification.

Brico-pinturas Dami https://pinturas-dami.com/img/m/42.jpg

LT0963
141 Items

Data sheet

Kind of product:
Primer
Degree of Brightness
Satin
Theoretical yield per hand (m2 / L):
6
Number of recommended hands:
two
Sanding between layers
It is not necessary
Dry to Touch at 23ºC and 60% RH
3-4 hours
Time for repainting at 23ºC and 60% RH
Minimum 8 hours, maximum 7 days.
Diluent / Cleaning:
Epoxy solvent
Number of Components
2 components
Mix ratio
4 parts of paint per 1 of catalyst
Life of the mixture at 23ºC and 60% RH
4 hours
Type Application:
By brush, roller or gun
Place of application
Interior and Exterior
Paint Iron or Steel
Directly
Paint Aluminum, Brass or Copper
Directly
Paint Wood
Directly
Paint Fiber Polyester
Directly
Paint Galvanized Steel
Directly
Paint Plastic
Directly
Paint Ceramic Surfaces
Directly
Paint Already Painted Surfaces
Eliminate if the paint is of one component
Danger for transport:
Prohibited Air Transportation
Antioxidant
Yes

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password