The DIY online store specializing in automotive paints and paints for the home
Menu
-
CAR PAINTINGS
-
PAINT AT HOME
- Varnishes for interior wood
- Exterior and marine varnishes for wood
- Exterior wood and deck stains and teak oils
- Enamels for Wood
- Furniture, kitchen cupboards and doors painting
- Chalk colour paint and chalk spray paint
- Anti termites treatments and woodworms protection
- Primers for Wood
- Wood putties
- Clean and Renovate Wood
- Furniture repair
-
PROFESSIONAL PAINT
-
BOAT PAINTING
-
CRAFTS
-
GARDEN
- COLD AND HEAT
-
HARDWARE
-
TOOLS
-
ELECTRICITY
-
PLUMBING AND GAS
- DECORATION
- ORDINATION
-
BATHROOM
- HOME
Search

Contact adhesive based on a modified polyurethane rubber solution. Transparent and colorless adhesive that ensures a clean job and prevents the appearance of stains that are common when using other conventional contact adhesives. It has excellent adhesion on most plastics: rigid or flexible PVC, polyurethane, methacrylate, cellulose acetate (except PE, PP and other polyolefins).
Contact adhesive in spray BUNITEX 400 ML Quilosa
Contact adhesive based on a modified polyurethane rubber solution. Transparent and colorless adhesive that ensures a clean job and prevents the appearance of stains that are common when using other conventional contact adhesives. It has excellent adhesion on most plastics: rigid or flexible PVC, polyurethane, methacrylate, cellulose acetate (except PE, PP and other polyolefins).

Related Products ( 16 other products in the same category )
Description
Contact adhesive based on a modified polyurethane rubber solution. Transparent and colorless adhesive that ensures a clean job and prevents the appearance of stains that are common when using other conventional contact adhesives. It has excellent adhesion on most plastics: rigid or flexible PVC, polyurethane, methacrylate, cellulose acetate (except PE, PP and other polyolefins).
Technical data
- Appearance: transparent solution
- Brookfield viscosity: Sp5/20 rpm, 23ºC: 4,500 ± 500 mPa.s
- Open time: Approx. 2 hours
- Aeration time: 5-10 minutes
- Temperature resistance: -20 to 60ºC
Applications
Contact adhesive especially indicated for the preparation of PVC sheets, fabrics, canvas, paper, among themselves or on other materials. Recommended for overlapping joints between flexible PVC sheets.
Indications of use
The surfaces to be glued must be clean, dry and free of dust and grease.
The application of the adhesive must be carried out on both sides with a brush or a toothed spatula, leaving a uniform layer. On porous supports it is convenientTry to apply two layers of adhesive with an interval of 20 minutes.
After application, allow 5 to 10 minutes for the solvents to evaporate and bond the two surfaces by contact, then applying strong and uniform pressure.
*If you want more information about this product, you can download its technical data sheet in the "ATTACHMENTS" tab
Data sheet
- Kind of product:
- Adhesive
- Diluent / Cleaning:
- Acetone
- Type Application:
- Spray
- Place of application
- Interior and Exterior
- Danger for transport:
- Prohibited Air Transportation
- Evaporation solvents
- 10-20 min
- Open work time
- 180 minutes
- Toluene
- It does not have
- Adhesive application mode
- 2 faces
No customer questions for the moment.