Leakproofing Oropalgum Oropal 15 L

Description

Waterproofing to water, based on acrylic styrene emulsion. Indicated for waterproofing roofs, easy to apply, providing a continuous thick-layer coating that allows repairing areas of cracks or areas prone to their formation. It resists external aging and maintains elasticity below 0ºC. Armable with fabrics and special fibers. Non-continuous walkable or passable, with resistance to soiling. Contains preservatives that provide the paint with fungicidal and anti-mold protection.

physical parameters

• Viscosity (Brookfield sp6 10rpm) 23000 – 43000 cpoise
• Specific gravity 1.35 – 1.39 g/mL
• Solids 58 – 60%
• VOC < 30g/L
• Limit value (2010) according to directive 2004/42/CE for this product (sub. cat. A/c): 40 g/L
• Yield 1 m2/L (1400 g/m2) (per coat)
• Appearance on the container Viscous liquid
• Appearance of the dry film
• Elastic matte finish with good leveling
• Stability (without opening the container) 12 months at 10 – 25ºC
• Gloss < 5%
• Adhesion 100% (Max: GT0)

Product use

• Cement support: concrete, stone and brick
• Preparation of the support: The surface must be dry, without efflorescence, stains or cracks of more than 0.2 mm in width. Sealing advisable
• Product preparation: No paintar at less than 10ºC, nor with risk of rain, fog or frost. Before applying, homogenize the product well with a spatula
• Application system: Brush and Roller
• Dilution Up to 15% with water (the first coat).
• Application: Seal the surface with OROIMPER 106 or with a coat of OROIMPER 115 diluted 15% with water. Apply two dry coats of OROIMPER 115, 500 µm, allowing each coat to dry thoroughly.
• Drying/curing Touch dry: 4 – 12 hours (depending on humidity) The drying time is greatly influenced by the grammage, the type and condition of the support and the environmental conditions.
• Repainting 18 – 24 hours (depending on humidity)
• WATER cleaning