Irurena Group Oropalgum Oropal Anti-Leak Waterproofing 15 L

Leakproofing Oropalgum Oropal 15 L

78,95VAT included

Waterproofing to water, based on acrylic styrene emulsion. Indicated for waterproofing roofs, easy to apply, providing a continuous thick-layer coating that allows repairing areas of cracks or areas prone to their formation. It resists external aging and maintains elasticity below 0ºC. Armable with fabrics and special fibers. Non-continuous walkable or passable, with resistance to soiling. Contains preservatives that provide the paint with fungicidal and anti-mold protection.

Size container
Colour
Selected color: English Red
Quantity DisponibilidadOut-of-stock

Related Products ( 11 other products in the same category )

Description

Waterproofing to water, based on acrylic styrene emulsion. Indicated for waterproofing roofs, easy to apply, providing a continuous thick-layer coating that allows repairing areas of cracks or areas prone to their formation. It resists external aging and maintains elasticity below 0ºC. Armable with fabrics and special fibers. Non-continuous walkable or passable, with resistance to soiling. Contains preservatives that provide the paint with fungicidal and anti-mold protection.

physical parameters

  • Viscosity (Brookfield sp6 10rpm) 23000 – 43000 cpoise
  • Specific gravity 1.35 – 1.39 g/mL
  • Solids 58 – 60%
  • VOC < 30g/L
  • Limit value (2010) according to directive 2004/42/CE for this product (sub. cat. A/c): 40 g/L
  • Yield 1 m2/L (1400 g/m2) (per coat)
  • Appearance on the container Viscous liquid
  • Appearance of the dry film
  • Elastic matte finish with good leveling
  • Stability (without opening the container) 12 months at 10 – 25ºC
  • Gloss < 5%
  • Adhesion 100% (Max: GT0)

Product use

  • Cement support: concrete, stone and brick
  • Preparation of the support: The surface must be dry, without efflorescence, stains or cracks of more than 0.2 mm in width. Sealing advisable
  • Product preparation: No paintar at less than 10ºC, nor with risk of rain, fog or frost. Before applying, homogenize the product well with a spatula
  • Application system: Brush and Roller
  • Dilution Up to 15% with water (the first coat).
  • Application: Seal the surface with OROIMPER 106 or with a coat of OROIMPER 115 diluted 15% with water. Apply two dry coats of OROIMPER 115, 500 µm, allowing each coat to dry thoroughly.
  • Drying/curing Touch dry: 4 – 12 hours (depending on humidity) The drying time is greatly influenced by the grammage, the type and condition of the support and the environmental conditions.
  • Repainting 18 – 24 hours (depending on humidity)
  • WATER cleaning

Irurena Group https://pinturas-dami.com/img/m/30.jpg

23045
0 Items

Data sheet

Kind of product:
Finishing paint or final coat
Degree of Brightness
Mate
Theoretical yield per hand (m2 / L):
3
Number of recommended hands:
3
Dry to Touch at 23ºC and 60% RH
1 hour
Time for repainting at 23ºC and 60% RH
2 hours
First layer application
Dilute between 20-25% so that it penetrates well into the support
Diluent / Cleaning:
Water
Type Application:
With brush or roller
Place of application
Only Exterior
Paint Galvanized Steel
Directly
Paint Ceramic Surfaces
Only if it is porous. Dilute first hand
Danger for transport:
Innocuous, without restrictions

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

New Account Register

Already have an account?
Log in instead Or Reset password