Polyurethane foam ULTRA FAST 70 Gun 750 ML Quilosa
One-component polyurethane foam that cures in contact with ambient humidity. The foam has been produced in accordance with the ISO 9001:2015 standard.
You might also like
Related Products ( 11 other products in the same category )
Description
One-component polyurethane foam that cures in contact with ambient humidity. The foam has been produced in accordance with the ISO 9001:2015 standard.
Technical data
Parameter (+23°C/50% RH) 1)
Yellow color
Capacity (free foam) [l] (RB024) 70 - 77
Capacity in a shaft [l] (RB024) 2) 38 - 45
Secondary volume increase (subsequent expansion) [%] (TM 1010-2012**) 30 - 50
Skin formation time [min] (TM 1014-2013**) ≤ 3
Full cure time [time] (RB024) ≤ 1.5
Cutting time [min] (TM 1005-2013**) 3) ≤ 10
Foam rise time [min] (RB024) 4) ≤ 6
Thermal conductivity coefficient (λ) [W/mK] (RB024) 0.036
Dimensional stability [%] (TM 1004- 2013**) ≤ 2
Flammability class (din 4102) B3
Acoustic insulation [dB] (EN ISO 10140) ≤ 63
Applications
+++ SEALING FOR WINDOW COUPLING
++ SOUND INSULATION
++ SEALING FOR DOOR COUPLING
+ FILLING OF EMPTY SPACES, CRACKS, HOLES, PIPE PENETRATIONS
+ SEALING OF CEILINGS, WALLS AND FLOOR JOINTS
+ THERMAL INSULATION
+++ foam indicated/recommended for this use; ++ foam suitable for this use; + foam that meets the basic requirements; - foam not suitable for this use
Properties
▲▲▲ FOAM CAPACITY
▼▼▼ FOAM PRESSURE
▼▼▼ INCREASED FOAM VOLUME (BACK EXPANSION)
■ FLAMMABILITY OF THE FOAM
- MULTIPOSITION OF THE FOAM
■ ADHESION OF THE FOAM TO THE SURFACE
▲▲▲ high; ▲▲ increased; ■ regular; ▼▼ decreased; ▼▼▼ low; - no app
Terms of use
Bottle / applicator temperature [°C] (optimum +20°C) +10 - +30
Substrate / ambient temperature [°C] +5 - +30
How to use
Before application, read the safety instructions given at the end of this Technical Data Sheet and in the Safety Sheet.
1. SURFACE PREPARATION
The foam especially adheres to typical construction materials such as: brick, concrete, plaster, wood, metals, Styrofoam, hard PVC and rigid polyurethane tubing.
• The work surface must be clean and degreased.
• The surface can be sprayed with water at an application temperature above 0°C.
• Protect exposed surfaces from possible accidental contamination by applying the foam.
2. PRODUCT PREPARATION
• If a pot is too cold, it will have to be brought to room temperature. For example, immersing it in warm water at a temperature of 30°C or leaving it at room temperature for at least 24 hours.
• The applicator temperature cannot be lower than the bottle temperature.
3. APPLICATIONON
• Wear protective gloves.
• Shake bottle vigorously (10 - 20 seconds, valve upside down) to thoroughly mix components.
• Screw the bottle onto the applicator.
• The working position of the boat is “valve upside down”.
• Fill the vertical gaps with foam from bottom to top.
• Do not fill the gap completely - the foam will increase in volume.
• Gaps greater than 3 cm are not recommended for sealing outdoor carpentry. Gaps greater than 5 cm are unacceptable. Gaps greater than 3 cm must be filled with vertical coats, making sure before applying another coat that the previously applied one has respected the preliminary processing time and that it has been sprayed with water.
• If application is interrupted for more than 5 minutes, clean applicator nozzle containing fresh foam with polyurethane foam cleaner and shake can before use.
4. WORKS AFTER COMPLETING THE APPLICATION
• Immediately after complete hardening of the foam, it must be secured against exposure to UV rays using eg plaster or paint.
• After finishing work, thoroughly clean the applicator. To do this, screw a bottle of cleaner onto the applicator and squeeze the trigger until the liquid begins to come out.
5. NOTES / RESTRICTIONS
*If you want obIf you have more information about this product, you can download its technical sheet in the "ATTACHMENTS" tab
Data sheet
- Kind of product:
- Polyurethane foam
- Dry to Touch at 23ºC and 60% RH
- 10 minutes
- Type Application:
- PU foam gun
- Danger for transport:
- Prohibited Air Transportation
- Capacity (free foam)
- Up to 45 (L)
- Capacity in a hole
- 24 - 32L
- Increase in secondary volume (subsequent expansion) [%]
- 180 - 210 (%)
- Full curing time
- 5 min
No customer questions for the moment.