The DIY online store specializing in automotive paints and paints for the home
Titanxyl Ultra Colorless Fund Treatment 4 liters
Wood protector TP08 for soft wood, ready to use solvent-based for new and used wood for classes of use 2 and 3. Class of use 2 : Covered and without contact with the ground, with risk of humidity. Class of use 3 : Outdoors, uncovered and without contact with the ground. Protection against wood-destroying fungi, bluing fungi and wood-destroying insects: Larvae, adult termites and nymphs.
You might also like
Related Products ( 5 other products in the same category )
Description
Impregnating preparation for wood, which acts in depth in a complete way, defending it against the penetration of water. Excellent background base to finish with Titanxyl Lasur Color, obtaining finishes with a natural rustic appearance, with perfect protection both indoors and outdoors. Very low odor.
Fields of application
For domestic and professional applications, such as windows, exterior doors, cladding, eaves, fences, canopies, etc.
Technical characteristics
- Color (UNE EN ISO 11664-4) Colorless
- Density (UNE EN ISO 2811-1) 0.80 Kg/l
- Yield 200 ml/m²
- Drying at 23ºC 60% HR (UNE 48301) 2 hours
- Repainting at 23ºC 60% HR (UNE 48283) 24 hours
- Application Methods Brush and roller with the undiluted product.
- Cleaning of Utensils White Spirit Mineral
- Application Conditions, RH<80% +10 ºC - +30 ºC
- Flash point (UNE EN ISO 3679) 57.5 ºC
- Composition IPBC: 0.75% / Propiconazole: 0.24% / Permethrin 0.25% / Hydrocarbon solvent C10-C13 n-alka
*Variations in temperature, humidity, thickness, dyeing or depending on the type of support, etc., can cause changes in drying, performance or other properties.
How to use
GENERAL RECOMMENDATIONS:
The product is ready forto be used and should not be diluted. Stir well in the container. The moisture content of the wood should not exceed 15%. Close container tightly after use. Before applying Titanxyl Lasur Fondo Ultra, protect plastic materials. The wood to be treated must be clean, dry, free of any rot at the time of treatment and free of any layer of varnish or paint to facilitate the penetration of Titanxyl Lasur Fondo Ultra. Cover the ground with plastic when making exterior applications. Do not apply the product in places where it could reach surface water, eg a bridge over a pond. Painted or varnished wood: completely remove existing layers with TITAN Plus Paint Remover and proceed as on unprepared surfaces, after thorough cleaning with solvents of paint remover remains.
UNPREPARED SURFACES:
Apply directly 1 or 2 consecutive layers of Titanxyl Lasur Fondo Ultra. Always finish with a suitable varnish or paint. Old unvarnished wood: it is essential to completely remove the dry and gray surface by sanding or stabbing thoroughly until exposing the wood in good condition. Then treat as unprepared surfaces. Resinous and tropical woods: they can prevent drying. Wash thoroughly with TITAN Yacht Thinner to remove resin. Apply a first coat on a small surface.oh observe If the exudation of resin persists, consult the technical service, otherwise apply the treatment and finish with the appropriate varnish or paint.
Data sheet
- Kind of product:
- Primer
- Theoretical yield per hand (m2 / L):
- 6.5
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 2 hours
- Time for repainting at 23ºC and 60% RH
- 24 hours
- Diluent / Cleaning:
- Universal Solvent
- Type Application:
- With brush or roller
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Danger for transport:
- Prohibited Air Transportation
No customer questions for the moment.