Teak Oil Spray Xylazel
Mixture of natural oils and resins, specially chosen fornourish and enrich the wood. The teak oil spray Xylazel is particularly suitable for keeping exotic and tropical woods such as teak or iroko.
You might also like
Related Products ( 14 other products in the same category )
Product Description
The oil spray Xylazel Teak is a mixture of natural oils and resins, specially chosen to nourish and enrich the wood. Indicated for the maintenance of exotic and tropical woods such as teak or iroko.
Effectiveness Xylazel teak oil spray
- Treated wood regains its natural balance and original qualities of brightness, texture and color.
- The drying trend is corrected, recovering the natural oils that wood loses over time
- The trend is corrected in the graying wood exposed to sunlight.
- The wood is protected from stains and dust.
Features teak oil Xylazel
- Very nutrient. Mitigates the effects of aging, especially patents bare wood exposed to sunlight.
- The texture is silky and smooth and natural tone.
- The application is simple and excellent penetration into the wood.
- Maintenance is simple. No need to sand or decapar, just clean the wood and directly apply a new coat of product.
Fields of application
It is used for maintenance and renewal of wood and furniture, especially teak and exotic tropical woods and unvarnished.
Performance
With Xylazel Teak Oil can be painted between 7 and 10 m2 per liter and per coat depending on how the product wood absorbs.
Surface preparation
Before applying the product, remove stains, dust, varnish and paint. To do this, wash with detergent and water, rinse thoroughly and let dry. If necessary, one removers are used to remove paints and varnishes old. In surfaces cleaned with Xylazel grayish grayish wood cleaner.
application
Shake the bottle well. The application of teak oil is simple, clean wood directly without filler. Treated wood should be clean, free of stains and dust. In varnished wood or painted above, it should be eliminated varnish or paint before treatment. Stir the envase abundant labor and product directly on wood is applied. After about twenty minutes, remove the excess with a cloth and apply a second coat. Leave to dry for a period of 3 to 4 hours, depending on environmental conditions. In media where product performance is unknown, a test was performed prior to application.
Cleaning tools:Solvent.
Notice
The colors are approximate and may vary depending on the computer screen you are using.
Data sheet
- Kind of product:
- Finishing paint or final coat
- Degree of Brightness
- Semi-matt
- Theoretical yield per hand (m2 / Spray):
- two
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 3-4 hours
- Time for repainting at 23ºC and 60% RH
- 30 min
- Type Application:
- Spray
- Place of application
- Interior and Exterior
- Paint Wood
- Directly
- Paint Already Painted Surfaces
- A smooth sanding and painting directly
- Danger for transport:
- Prohibited Air Transportation
- advice
- Once the product has been applied, remove the excess that has not absorbed the wood with a dry cloth
Specific References
- ean13
- 8414956716892
No customer questions for the moment.