Titan Corrosion Epoxy Primer Yacht
Two-component primer. High adhesion, water resistance and protective effect. Base suitable for products TITAN Yate. For use on submerged surfaces in marine environments, especially iron, aluminum, stainless steel, etc., as well as wood and polyester.
You might also like
Related Products ( 5 other products in the same category )
Description
Two-component primer. High adhesion, water resistance and protective effect. Adequate basis for products TITAN Yate.
Fields of application
Two-component primer for use on submerged surfaces in marine environments, especially iron, aluminum, stainless steel, etc., as well as wood and polyester.
Technical characteristics
- Color: Cream
- Finish: Semi-gloss
- Performance: 8-10 m2 / l (30-40 μ dry)
- Drying at 23 ° C 60% RH 2.5 - 3 days
- Repainting 60% RH at 23 ° C: 24 hours
- Mixing ratio: Base: 4 Hardener: 1
- Pot Life at 23 ° C: 6 - 8 hours
- Tools: brush, roller or spray
- Thinner: Epoxy Thinner
- Cleaning of tools: Thinner Epoxy
How to use
General recommendations:Remove the container well. The I learnedrficies painted must be clean, dry and degreased.
Unprepared surfaces
-Polyester:degrease thoroughly with Thinner TITAN Yacht and sand lightly before applying a coat of primer Epoxy Corrosion TITAN Yate.
-Hull metal (submerged): deoxidation and apply one coat of primer Epoxy Corrosion TITAN Yate. After 24 hours, apply 3-4 coats of Primer Epoxy Thick TITAN M150 Yate (450μ).
-Superstructure:deoxidation and apply 2 -. 4 layers of primer Epoxy Corrosion at intervals of 24 hours
-Wood:apply 2 coats of primer Epoxy Corrosion TITAN Yate diluting the 1st layer with 20% Thinner TITAN Yate.
Maintenance painted surfaces in good condition:Rinse with fresh water jet and apply directly.
Maintenance painted surfaces in poor condition:I completely eliminate Plus with TITAN Paint Stripper, followed by a wash with fresh water andproceed as unprepared surface.
Data sheet
- Kind of product:
- Primer
- Theoretical yield per hand (m2 / L):
- 8
- Number of recommended hands:
- two
- Sanding between layers
- It is not necessary
- Dry to Touch at 23ºC and 60% RH
- 3 hours
- Time for repainting at 23ºC and 60% RH
- 24 hours
- Diluent / Cleaning:
- Epoxy solvent
- Number of Components
- 2 components
- Mix ratio
- 4 parts of paint per 1 of catalyst
- Life of the mixture at 23ºC and 60% RH
- 6 a.m.
- Type Application:
- By brush, roller or gun
- Place of application
- Interior and Exterior
- Paint Iron or Steel
- Directly
- Paint Aluminum, Brass or Copper
- Directly
- Paint Wood
- Directly
- Paint Fiber Polyester
- Directly
- Paint Galvanized Steel
- Directly
- Paint Plastic
- Directly
- Paint Ceramic Surfaces
- Directly
- Paint Already Painted Surfaces
- Eliminate if the paint is of one component
- Danger for transport:
- Prohibited Air Transportation
Specific References
- ean13
- 8414800059274
No customer questions for the moment.